1. Technical Training Series 2000 Release 6.2 Features and Enhancements Partner Beta Training Course

2. Instructor  Bryan Edwards  Telephone 44 118 974 8000  Video 44 118 974 8108  E-mail bedwards@ezenia.com

3. Course Objective  At the end of this course you will be able to:  Explain the Features and Enhancements of Series 2000 Multimedia Communication Servers - Release 6.2  Configure the new options 3

4. Prerequisites  It is expected that you will  Have knowledge of Series 2000 Release 6.1  Have attended System Administrator Training for MCS version 6.x

5. Contents  This course contains these Sections:  Section 1 - Series 2000 Release 6.2 Features  Panoramic View  Autoscan for the Presenter  TCA/TIR Support  Section 2 - Series 2000 Release 6.2 Enhancements  HSD2  INF File Format Change  Triple Network Bus Support  Section 3 - General Information

6. Administration  Course time  Breaks

7. Technical Training Series 2000 Release 6.2 New Features

8. Release 6.2 New Features  This Module explains the following new features:  Panoramic View  Autoscan for the Presenter  Token Command Association/Token Indicate Response Support (TCA/TIR)

9. New Panoramic View Feature  The ability to divide the continuous presence video site view into three windows  The top view appears in “landscape” format across the top of the other two site views New Panoramic Window ViewOriginal Standard (Quadrant) View

10. Panoramic View Supports  Three anchored windows  Two anchored windows with one voice activated  Switching between full screen and Panoramic Continuous Presence  Lecture Mode  CollaboRates™ and up to E1/T1 rates (requires Enhanced Continuous Presence and CollaboRates Option)  Conference Talk

11. Panoramic View Supports (cont.)  Chair Control  H.261 CIF and QCIF video formats  Annex D Graphics

12. Generating Panoramic View  Panoramic View generated using minimal cropping of image  capture 164 lines from middle of image  1/6 taller than standard CP  uses only 3 to 4 scan lines from lower two windows  Will not use filtering of lines to modify the image  Reduces possible issues with frame rate reduction.

13. Picture build 288 352 164 124 164 268

14. Continuous Presence View Selections Scheduler Screen Standard View Panoramic View NEW

15. Voice Activated Window Selection Scheduler Screen Click a button to turn on voice activation in the Panoramic, 2, or 3 window

16. Adding a Site to a Conference Click a button to add a site to a window (in this case Voice Activated Window has been selected for the 1st window)

17. Scheduler Screen  Site List Detail  The Window column in the Site List Detail shows a graphic representation of the selected window

18. Panoramic Selections on the Conference Manager Screen Click to toggle between Panoramic and Full Screen Voice Activated Views New Panoramic Continuous Presence Menu Selection

19. Conference Manger Site Information Double click a Site Number to retrieve detailed information about that site

20. Conference Manger Detailed Site Information Shows Site Video Mix Panoramic Selection

21. Panoramic Restrictions  Release 6.2   Requires Continuous Presence Module (CPM)  Voice Activated Window requires Enhanced Continuous Presence and Collaborates option

22. Autoscan Trainer

23. New Autoscan Feature  Allows the primary broadcaster (presenter or lecturer) to view all sites in a conference for a pre- defined interval  This feature is of particular value in distance learning applications.

24. Autoscan Operation  Must configure before conference starts  Then on by default  Loops through the sites in order by site number as defined by Conference Manager  New people added at end of list  Default scan 15 seconds per site  User selectable 3 digit scan rate (in seconds)  Only the broadcaster sees the Autoscan display (doesn’t include broadcaster’s site)  Other participants see full screen view of the presenter/lecturer

25. Autoscan Supports  Modes Supported  Continuous Presence Lecture mode  Continuous Presence Lecture mode with Voice Activated Window  Fixed Presenter Mode

26. Autoscan in Fixed Presenter  Participants see presenter full screen  Presenter views each site full screen for pre- defined interval in order of site number  Autoscan stops with voice activation to view the loudest speaker if Broadcaster’s View is defined as Voice Activated.  Autoscan resumes after the Presenter speaks for two scan rates  Suggested mode for distance learning

27. Autoscan in Fixed Presenter Fixed Presenter FP 1 2 3 4 5 6 1 6

28. Autoscan in Fixed Presenter Mode Defining Autoscan in Fixed Presenter Mode Site Parameters Screen Autoscan Selection Autoscan Interval Duration

29. Autoscan in Continuous Presence Lecture Mode  Continuous Presence Lecture Mode (no voice activated window)  Autoscan is activated for one window in the video mix. This window will cycle through the roster of unanchored sites that are currently transmitting video.  The Autoscan window  Does not display the Lecturer  Does not display anchored sites  Prevents seeing the same user in two different windows at the same time.

30. Autoscan in Continuous Presence Lecture Mode Fixed Presenter FP 1 2 3 4 5 6 1 6 2 3 4

31. Autoscan in Continuous Presence Lecture Mode Fixed Presenter FP 1 2 3 4 5 6 1 6 2 3

32. Autoscan in Continuous Presence Lecture Mode No Voice Activated Window Site Parameters Screen Standard Window, not voice activated, with Autoscan Icon Autoscan Selection Autoscan Duration

33. Autoscan in Continuous Presence Lecture Mode  With Voice Activated Window  Autoscan is a subroutine of voice activated switching  You scan when the lecturer or anchored sites are speaking  Autoscan stops with voice activation to view the loudest non- anchored speaker  Autoscan resumes after the lecturer or anchored sites speak for two scan rates  Autoscan and Voice Activated occur in the same window.

34. Autoscan in Continuous Presence Lecture Mode Fixed Presenter FP 1 2 3 4 5 6 1 6 2 3 VAW

35. Autoscan in Continuous Presence Lecture Mode Fixed Presenter FP 1 2 3 4 5 6 1 6 2 3 VAW 4

36. Autoscan in Continuous Presence Lecture Mode with Voice Activated Window Voice Activated, Panoramic Window, with Autoscan Icon Autoscan Selection Site Parameters Screen Autoscan Duration

37. Toggling AutoScan On/Off  The Conference Manager AutoScan icon allows users to toggle AutoScan on or off during an active conference  Conference must be pre-defined with AutoScan

38. Toggling Autoscan On/Off Conference Manger Screen New Autoscan Menu ItemNew Autoscan Button

39. Autoscan Restrictions  Must configure before conference  For release 6.2   Not for use with Collaborates  Turn on/off through Conference Manager (not with Chair control)  Not supported in cascaded continuous presence lecture mode conferences

40. TCA/TIR Support  Token Command Association (TCA)  A standard BAS code sent by an endpoint requesting the MCU to provide the terminal numbers associated with the Chair, HSD, and LSD token holders  Token Indicate Response (TIR)  A standard BAS code that responds to a TCA request which includes the MCU and terminal numbers of the Chair, HSD, and LSD token holders

41. TCA/TIR BAS Codes  Endpoints which support TCA/TIR can request from the MCU, the names of the holders of low speed data, high speed data, and chair control tokens CODECMCU TCA TIR

42. Technical Training Series 2000 Release 6.2 Enhancements

43. Release 6.2 Enhancements  HSD2 Support  INF File Changes  Triple Bus Support

44. HSD2 Enhancement  HSD2 replaces HSD  Updated V.35/RS-449 High Speed Data Module  Supports the existing HSD functionality  Benefits  The HSD2 module works with unsynchronized interfaces  FIFO buffer to resolve clock shift  The HSD2 card has a Master clock mode  Provide network bus clocking for the MCU  For situations where V.35 is the only interface used (e.g., ISDN not available or too expensive)

45. HSD2 Enhancement  Supported in all chassis types (2007 &2020)  Supports 14 cards for 2x64k and 12 cards for all other connections  Fully compatible with other network cards (including HSD)  V.35 and RS449 connections are now detected automatically (no jumpers required)  Supports cascading across HSD2 modules and between HSD and HSD2

46. HSD2 Module

47. HSD2 Configuration Enhancement

48. .INF File Changes  Reorganized Information in the INF File  Conference general information concentrated at top of file  Per Site Information in lower portion on file  Phone number  Site name, etc.

49. Sample New.INF File > Schedule - DateStamp: 01/24/2000 Schedule - TimeStamp: 17:17:16 Schedule - Login User: a,a Conference ID: 2680 Conference Name: test1 Description: Conference Password: Billed to: Conference Date: 01/24/2000 Time: 17:17:00(EST ) Duration: 60 minutes Extend-Buffer Time (remaining) = 0 minutes Type: Audio-Video

50. Transfer Rate: 2*64 Kbits/s (Unrestricted) Audio Protocol: G728 Preferred Video Format: H263/ Minimum Video Picture Rate: QCIF/SQCIF: 7.5 Frames/Second Fixed-Broadcaster's View: Previous Broadcaster Options: Site: 10 Coordinator: Phone Number: Time Zone: EST Connection Method: Dial In to MCS Transfer rate 2x64 (unrestricted) MCS's Phone Numbers: 1111110 Site: 10 Coordinator: Phone Number: Time Zone: EST Connection Method: Dial In to MCS Transfer rate 2x64 (unrestricted) Sample New.INF File (cont.)

51. Triple Network Bus  The Triple Network Bus Configuration consists of three physically independent and identical buses: Network Bus1, Network Bus 2, and Network Bus 3.  Triple Network Bus now supports Dialed switched connections and IMUX boards

52. Triple Network Bus Configuration  The 20-slot MCS supports the Triple Network Bus with these configurations  IMUX can reside on the third bus.  ATM cards can reside in the first two buses  Triple network bus now supports additional IMUX connections – at all rates.  E1/T1 can reside on the third bus.  HSD(2) can reside on the third bus.

53. Technical Training Series 2000 Release 6.2 General Information

54. General 6.2 Information  Support for V-NIC/25 now removed  Support for VC-NIC/25 continued  although card no longer available  ATM current option only  VC NIC/155  Packaging  All MCU, workstation software, and some documentation is provided on CD  Workstation not available on diskette  Workstation diskettes can be made from the CD

55. General 6.2 Information  Patches 6.1.0.1 - 6.1.0.9 fixes included in 6.2  Release Notes for 6.2 Beta  Will contain any restrictions in 6.2 Beta  Will be available in paper copies only.  Documentation will be available  All Documentation in Beta (will be updated for FCS)

56. Summary  Topics Covered  Series 2000 Release 6.2 Features  Panoramic View  Autoscan for the Presenter  TCA/TIR Support  Series 2000 Release 6.2 Enhancements  HSD2  INF File Format Change  Triple Network Bus Support  General Information  Questions?

57. And now the good news