2. TPO Corners

3. Installing an Outside Corner:

4. Outside Corner Steps: Complete field and curb membrane attachment.Start welding with pre-molded corner against the curb and work out onto the field sheet. Place welder tip into vertical and work your way out. Be sure to roll the edges of the curb wrap and flashing.

5. Welding Focus

6. Something to look for… If the corner cut in the field around the curb extends more than 1” into the field, a patch of TPO membrane is required and then apply the outside corner flashing.

7. Completed Outside Corner The detail is complete once the corner is installed in accordance with current Firestone details and passes a probing test.

8. Things to look for

9. Right or Wrong?

12. Installing an Inside Corner:

13. Inside Corner Steps Cut Line Place pre-molded inside corner into corner, being sure to cover the pinhole, and weld from the center out. Make sure to roll the corner properly and avoid over heating the corner.

14. Installing an Outside Corner: The detail is complete once the corner and T-patch are installed in accordance with current Firestone details and passes a probing test.

15. Things to look for

16. Right or Wrong?