1. Dewbot VI first thoughts Hong Kong & in-transit 10-January-2010 Clem McKown

2. Essential Capabilities Ability to climb 45°, 13” high “bumps” without capsizing – gotta get over the hump! – fast fast fast Need to get balls over the bumps or through the tunnels and into goals fast Need to herd balls – fast That said, not sure the robot needs to be particularly high speed – it needs to do its business without a lot of hesitation

3. Scoring Scored Ball – 1 pt Elevated Robot – 2 pts Suspended Robot – 3 pts Less penalties

4. Balls 3 start far; 2 mid; 1 near 8.75” typ diameter - ~1 lb All reentered balls reenter mid – but are likely to role to far through tunnel Scoring tends to send balls to opposing alliance side of field

5. More Balls Balls cannot extend more than 3” inside the frame perimeter Balls cannot be carried (must remain in contact with floor) Only one ball at a time may be possessed Possession means that if the robot spins in place or backs up, the ball stays with the robot But several may be herded

6. Elevated – 2 pts/robot Completely above the plane of the platform and in contact with the tower Platform is 20” off the floor Is a robot on the platform “Elevated”?

7. Suspended – 3 pts/robot A robot only in contact with an elevated robot or a suspended robot

8. Penalties - -1 pt each Handling balls before they are in the Corral Not using Trident to return balls (2x) Ball return timing Lots more!!

9. Crossing the line Completely crossing the centerline in autonomous will result in a penalty

10. In the zone Only one alliance robot may be in the opposing alliance’s zone

11. Configuration (Envelope) 120 lb Excludes battery & bumpers Normal – at the match start and during normal play, the robot must stay within this envelope 28” x 38” 60” tall Finale 84” diameter cylinder 90” tall

12. Bumpers Bumper zone is 10-16” off the floor Bumpers must protect the entire frame perimeter Must protect corners Must be backed by frame 6” minimum segment length Must be solid red or solid blue color – bumper color will indicate alliance May be marked with Team # only 20 lb max (not included in robot wt)

13. Extensions beyond frame perimeter Solely to interact with the ball, objects below the bumper zone (10”) may extend out to the bumper perimeter for no more than 2 sec Cannot extend again for 2 sec thereafter Robot can extend to Finale Configuration to right itself or alliance partner Robot can extend to Finale Configuration during last 20s to Elevate or Suspend

14. Autonomous 15 s Goal If in mid or far field – herd/shoot balls into next nearer field If in near field – score 1 ball

15. Tunnel 36” wide x 18” tall A short robot could pass through During normal play, there is no need for extensions above 18”

16. The Hump Probably only able to cross hump driving in long (x) axis (unless CG very low) 6wd will tilt 45° on climb and decline – with a significant tipping moment on the decline 4wd will tilt less and reduce tipping moment – as long as it does not bottom out Keep CG low and centered! Power & traction needed

17. Pneumatics Max of 4 Clippard tanks allowed Solenoid valves may have a maximum 1/8” NPTF port size and 0.32 Cv Cylinders Any number 24” maximum stroke 2” maximum diameter Any configuration 60 psig max working pressure

18. Motors Allowable motors are All KoP Motors Unlimited number of servos with 55 oz-in torque & 100 rpm rotational speed Unlimited number of FTC servos A maximum of 3 additional (5 total) CIM motors There are (4) Nisso-Denko motors (2 each L & R) in KoP – these have worm gear reduction – (4) couplers provided 2 Fisher Price -9015 motors (& plastic gearboxes) 1 Mabuchi motor RS555SH-2670 1 Mabuchi motor RS555VC-3754 No Globe motors

19. Budget Limits $3,500 Robot limit KoP parts valued at $0 $400 max per component Individual fasteners <$1 ea are excluded from this calculation “Recycled” parts valued at undepreciated original value

20. Herder Under-bumper herder/pusher/shooter should be feasible Probably pneumatic push/shoot Prevent ball penetration under frame >3” Use 3” sides to prevent ball loss Push balls over hump (with partial climb) or shoot through tunnel or into goal 2 sec max extension Best if full frame width… Better if wide orientation Herd more balls Herd balls easier Corresponds to tunnel & goal width

21. Ideas Keep robot low in normal configuration Low CG – tip-proof (like DEWBOT V) Fit through tunnel? 4wd to moderate tipping angles and moment Pivot or wide 4wd to enable wide herding & shooting (need to manage tipping potential) If Pivot, Snake & Automobile modes seem more useful than Crab

22. Ideas Tilt-a-frame to climb onto Platform Driven wheels Undriven tilt lift

23. Ideas Shooter / pusher / herder device Same shooter / pusher / herder idea on 2 axis w/ pivot drive For short side (x-drive), could be almost 28” wide if front wheels are shifted aft For long side (y-drive), would need to be inset for drive wheels (because you probably could not sacrifice the wheelbase here) – so maybe same effective width as short side x pushery pusher

24. Ideas Low-velocity, wide, un-aimed shooter / pusher at one end of robot High-velocity, focused, aimed kicker at the other end

25. Ideas Non-overlapping “wings” folded on top of robot to act as “righters” should the robot overturn. These could also provide hanging or lifting points for suspension