1. The Auto Shop and Safety
By Steve Street

2. After study you will be able to. . .
Describe the typical layout and sections of an auto shop.
List any accidents or incidents that could occur in an auto shop.
Know how to prevent these accidents.
Tell about the general safety rules.

3. The Auto Shop Layout

4. Auto Shop Layout
There are several different areas in an auto shop. You must know the basic rules that apply to each. It is important that you learn your shop layout and the organization to improve work efficiency and safety.
The auto shop includes the following work areas:
Repair area
Toolroom
Classroom
Locker Or Dressing room

5. Repair Area
The repair area includes any location in the shop where repair operations are performs. It normally includes every area except the classroom, toolroom, and locker room.

6. Toolroom
The toolroom is a shop area normally adjacent to (next to) the main shop or classroom. It is used to store shop tools, small equipment, and supplies. When working in the tool room you will be responsible for keeping track of shop tools.

7. Classroom
The classroom is often located adjacent to the repair area. It is used for seminars, demonstrations, and other technician training activities. The classroom may also be used for employee meetings.

8. Locker or Dressing Room
The locker or dressing room is usually located adjacent to the main shop. It provides an area for changing into your work clothes. Always do your part to keep this area clean and orderly.

9. Types of Accidents
If an accident or injury occurs in the shop notify the instructor immediately. use common sense when deciding whether to get a fire extinguisher or to take other actions.
Basically, you should be aware of and try to prevent six kinds of accidents:
Fires
Explosions
Asphyxiation
Chemical Burns
Electric Shock
Physical Injuries

10. General Safety Rules

11. Wear any eye protection during any operation that could endanger your eyes. This would include operating any power tool working around a running car engine, carrying batteries, etc.

12. Avoid anyone who does not take shop work seriously
Avoid anyone who does not take shop work seriously. Remember, a joker is “an accident just waiting to happen.”

13. Keep your shop organized
Keep your shop organized. Return all tools and equipment to their proper storage areas. Never lay tools, creepers, or parts on the floor.

14. Never carry sharp tools or parts in your pocket
Never carry sharp tools or parts in your pocket. They can puncture the skin.

15. Work like a professional
Work like a professional. When learning auto repair, it is easy to get excited about your work. However, avoid working to fast. You could over look a repair procedure or safety rule.

16. Keep guards or shields in place
Keep guards or shields in place. If a power tool has a safety guard use it.

17. Drive slowly while in the shop area
Drive slowly while in the shop area. With all the students and vehicles in the shop, it is very easy to have an accident.

18. Report unsafe conditions to your instructor
Report unsafe conditions to your instructor. If you notice any type of hazard, let your instructor know about it.

19. Read material safety data sheets when in doubt about any dangers
Read material safety data sheets when in doubt about any dangers. The material safety data sheet contains all the information needed to work safely with the hazardous material.

20. Obtain instructor permission before using and new or unfamiliar power tool, lift, or other shop equipment. If necessary, your instructor will give a demonstration.

21. In conclusion. . .
The auto shop can be a very safe and enjoyable place to work. However, if basic rules are not followed, an auto shop can be very dangerous. So let’s all be safe!!!