1. Chapter 8 Statics Statics

2. Equilibrium An object either at rest or moving with a constant velocity is said to be in equilibrium An object either at rest or moving with a constant velocity is said to be in equilibrium The net force acting on the object is zero (since the acceleration is zero) The net force acting on the object is zero (since the acceleration is zero)

3. 1 st Condition for Equilibrium Net force vanishes Net force vanishes

4. Method Isolate object of interest Isolate object of interest Draw picture, label all forces Draw picture, label all forces Choose appropriate coordinate system Choose appropriate coordinate system Resolve into components Resolve into components Write equations for equilibrium Write equations for equilibrium Solve equations for unknowns Solve equations for unknowns

5. Example Mass m on table top Mass m on table top 200 lb man hanging from rope 200 lb man hanging from rope

6. Example (ex 2) Find tensions in the ropes.

7. Example 8.4 Two objects are in equilibrium. Find the weight of the one on the left and tensions.

8. Force vs. Torque Forces cause accelerations Forces cause accelerations Torques cause angular accelerations Torques cause angular accelerations rotationrotation Force and torque are related Force and torque are related

9. Torque The door is free to rotate about an axis through O The door is free to rotate about an axis through O There are three factors that determine the effectiveness of the force in opening the door: There are three factors that determine the effectiveness of the force in opening the door: The magnitude of the force The position of the application of the force The angle at which the force is applied

10. Torque, cont Torque, , is the tendency of a force to rotate an object about some axis Torque, , is the tendency of a force to rotate an object about some axis  is the torque  is the torque F is the force F is the force symbol is the Greek tausymbol is the Greek tau l is the lever arm l is the lever arm SI unit is N. m SI unit is N. m Lever Arm: Perpendicular distance from the pivot point to the line of force Lever Arm: Perpendicular distance from the pivot point to the line of force

11. Direction of Torque Torque is a vector quantity Torque is a vector quantity We will treat only 2-d torque so no need for vector notion.We will treat only 2-d torque so no need for vector notion. If the turning tendency of the force is counterclockwise, the torque will be positive (+)If the turning tendency of the force is counterclockwise, the torque will be positive (+) If the turning tendency is clockwise, the torque will be negative (-)If the turning tendency is clockwise, the torque will be negative (-)

12. Multiple Torques When two or more torques are acting on an object, the torques are added When two or more torques are acting on an object, the torques are added with the signswith the signs If the net torque is zero, the object’s rate of rotation doesn’t change If the net torque is zero, the object’s rate of rotation doesn’t change

13. General Definition of Torque The applied force is not always perpendicular to the position vector The applied force is not always perpendicular to the position vector The component of the force perpendicular to the object will cause it to rotate The component of the force perpendicular to the object will cause it to rotate F is the force F is the force L is distance between pivot and point of action L is distance between pivot and point of action  is the angle  is the angle

14. Example (8.20) Torque problem

15. Center of Gravity The weight of an object can cause object to pivot The weight of an object can cause object to pivot C.G. used as pivot will have no torque due to gravity C.G. used as pivot will have no torque due to gravity In finding the torque produced by the force of gravity, all of the weight of the object can be considered to be concentrated at a single point, C.G. In finding the torque produced by the force of gravity, all of the weight of the object can be considered to be concentrated at a single point, C.G.

16. Center of Gravity of a Uniform Object The center of gravity of a homogenous, symmetric body must lie on the axis of symmetry. The center of gravity of a homogenous, symmetric body must lie on the axis of symmetry. Often, the center of gravity of such an object is the geometric center of the object. Often, the center of gravity of such an object is the geometric center of the object.

17. Experimentally Determining the Center of Gravity The wrench is hung freely from two different pivots The wrench is hung freely from two different pivots The intersection of the lines indicates the center of gravity The intersection of the lines indicates the center of gravity A rigid object can be balanced by a single force equal in magnitude to its weight as long as the force is acting upward through the object’s center of gravity A rigid object can be balanced by a single force equal in magnitude to its weight as long as the force is acting upward through the object’s center of gravity

18. 2 nd Condition for Equilibrium No rotation No rotation Net torque vanishes Net torque vanishes

19. Example 1000 N sign painter on an uniform 250N board suspended by two ropes. The board is 5m long. If the rope can hold only 900 N, is it safe for him to stand 1m from a rope?

20. Example 600 N worker standing 1.5 m from the wall on 5m long and 300N beam as show. Find tension in the cable and the force on the beam by the wall.