1. K-Tool SECTION: Tools and Equipment ISSUED: 02-2011REVISED: ##-####

2. Objectives To provide an understanding of the following –Specifications –Use –Maintenance –Safety

3. Specifications Steel block Replaceable harden steel blades K-shaped notch that grips lock cylinder U-shaped flange on opposite side

4. Use “Through the lock” forcible entry Pulls lock cylinders –Rim or mortise Used in conjunction with irons and key tool

5. Maintenance Check for cracks and burrs File any burrs on blades Ensure blades are secure Remove rust with wire wheel or brush Clean with warm soapy water Dry thoroughly Apply thin coat of WD40 to prevent rusting

6. Key Tool

7. Specifications Shove knife Flat end key Cam end key Square key V point key

8. Use Manipulates internal locking mechanism –Mortise lock –Rim locks –Cylinder locks

9. Maintenance Ensure keys move freely Ensure keys are not bent Clean with warm soapy water Dry thoroughly

10. Safety Wear appropriate PPE –Minimum of helmet, gloves, and eye protection Full turnouts and SCBA are required when utilizing the tool in an IDLH atmosphere or when making entry into a possible IDLH atmosphere Check surroundings prior to using tool Ensure the tool is the right tool for the job