1. 7 th Grade 3D Solid Modeling Test (Google SketchUp) Written by Pam Brown

2. Identify the following images

3. Question 1 A. Rectangle B. Push/Pull C. Orbit D. Measure E. Zoom

4. Question 2 A. Rectangle B. Push/Pull C. Orbit D. Measure E. Zoom

5. Question 3 A. Rectangle B. Push/Pull C. Orbit D. Measure E. Zoom

6. Question 4 A. Rectangle B. Push/Pull C. Orbit D. Measure E. Zoom

7. Question 5 A. Rectangle B. Push/Pull C. Orbit D. Measure E. Zoom

8. Question 6 A. Circle B. Pan C. Erase D. Line E. Select

9. Question 7 A. Circle B. Pan C. Erase D. Line E. Select

10. Question 8 A. Circle B. Pan C. Erase D. Line E. Select

11. Question 9 A. Circle B. Pan C. Erase D. Line E. Select

12. Question 10 A. Circle B. Pan C. Erase D. Line E. Select

13. Question 11 Identify the Origin

14. Question 12 Identify the x axis

15. Question 13 Identify the y axis

16. Question 14 Identify the z axis

17. Read the following drawings

18. Question 15 How thick is this object? A.3” B.6” C.12” D.Unknown 12” 6” Dia6”

19. Question 16 What is the diameter of the hole? A.3” B.6” C.12” D.Unknown 12” 6” Dia6”

20. Question 17 What is the length of this object? A.3” B.6” C.12” D.Unknown 12” 6” Dia6”

21. Question 18 What is the width of the stairs? A.12” B.36” C.48” D.Unknown 12” 36” 48”

22. Question 19 What is the rise (height) of each stair? A.12” B.36” C.48” D.Unknown 12” 36” 48” 12”

23. Question 20 What is the run (front to back of the tread) of each stair? A.12” B.36” C.48” D.Unknown 12” 36” 48” 12”

24. Question 21 What length of this object? A.2 1/2” B.4” C.5” D.10” Dia4” R5” 2 1/2” 10” 5”

25. Question 22 What is the width of this object? A.2 1/2” B.4” C.5” D.10” Dia4” R5” 2 1/2” 10” 5”

26. Question 23 How much was this object extruded? A.2 1/2” B.4” C.5” D.10” Dia4” R5” 2 1/2” 10” 5”

27. Question 24 What is diameter of the circle? A.2 1/2” B.4” C.5” D.10” Dia4” R5” 2 1/2” 10” 5”

28. Question 25 What is radius of the arc? A.2 1/2” B.4” C.5” D.10” Dia4” R5” 2 1/2” 10” 5”

29. Answer the following questions

30. If the radius of a circle is 3” what is the diameter? A. 1.5” B. 3” C. 6” D. unknown Question 26

31. If the diameter of a circle is 10” what is the radius? A. 5” B. 10” C. 20” D. unknown Question 27

32. Question 28 Which axis represents the length? AA B C

33. Question 29 Which axis represents the width? A B C

34. Question 30 Which axis represents the height? A B C

35. What is the name of any surface of an object? A. Side B. Surface C. Edge D. Face Question 31

36. What is the correct term for a push or pull on any shape or face? A. Shell B. Extrude C. Mate D. Revolve Question 32

37. What can be done by extruding a face or shape? A. Add material B. Subtract material C. Add and Subtract material D. Revolve material Question 33