1. Video over IP Receiver by ATecoM
Birdie
Video over IP Receiver
by ATecoM

2. General Information
Converts an IP/UDP-encapsulated MPEG-TS (SPTS or MPTS) to DVB-ASI.
Available as stand-alone product or for integration into 3rd party products
Small form factor of 1/3 19” (100x220mm)
Optional AC PSU as 1/3 19” unit (supplying up to 2 “Birdie” units)
Low power consumption (< 30W)
DC input (12-36V= or 36-72V=)
Configuration samples
Up to 3 “Birdie” units in 1RU (external PSU)
2 “Birdie” units + 1 AC-PSU (for both units) in 1RU
Single board (external PSU)
Available End of Q1/2007
Full Production Q2/2007

3. Pictures

4. MPEG-TS Processing WAN-Interface Multicast support
100/1000BaseT
1000BaseT SX (optional)
Multicast support
UDP/IP & RTP de-encapsulation according to Pro-MPEG CoP-3
FEC according to Pro-MPEG CoP-3
Adaptive Clock Recovery for absorption of network jitter
DVB-ASI output EN
188 or 204 Byte
Byte- and Packet mode
Full set of statistics

5. Statistics Ethernet Interface RTP/RTCP ProMPEG FEC
According to IF-MIB
RTP/RTCP
Valid, missing, fixed, duplicate, re-ordered & out of range packets
ProMPEG FEC
Discarded packets
Adaptive Clock Recovery
Bitrate (min., act., max)
Output buffer level (min., act., max.)

6. Management Management ports Full SNMP support (V3 & V2c)
RS232
10/100BaseT
Inband over WAN interface
Full SNMP support (V3 & V2c)
Embedded Web-Server
Permanent storage of configuration parameters
Performance monitoring

7. Outlook Features under development Development based on demand
2nd ASI Output (independent streams)
IP Timestamp Option for network jitter analysis
Seamless ASI protection switching
Development based on demand
DVB-ASI to IP converter