1. Abuse Testing LabMinder 2.1 What’s New

2. New Features Disable workstations Ignore times LabMinder module BcTS module Module merge Networked signal tower support New modem (separate power supply)

3. Disable Workstations Allow user at a workstation to prevent LabMinder from sending notifications for a set time – Can disable entire workstation – Can disable for a given parameter being monitored

4. Disable Entire Workstation Use LabMinder Agent: - Select Workstation and duration to disable - Message sent to LabMinder Server Use LabMinder Agent: - Select Workstation and duration to disable - Message sent to LabMinder Server Server shows station offline - See countdown until reenabled Server shows station offline - See countdown until reenabled

5. Disable by Channel (Parameter) Use LabMinder Agent: - Select channel that needs to be disabled - Select time period Use LabMinder Agent: - Select channel that needs to be disabled - Select time period Server continues to show channel online - Only the selected channel is not monitored - Note: staring a test automatically enables monitoring Server continues to show channel online - Only the selected channel is not monitored - Note: staring a test automatically enables monitoring

6. Ignore Times Define time for LabMinder to ignore changes to a channel on server - After channel crosses threshold, ignore time must expire before SOH will be affected - Can allow/prevent local override on workstation Define time for LabMinder to ignore changes to a channel on server - After channel crosses threshold, ignore time must expire before SOH will be affected - Can allow/prevent local override on workstation

7. BcTS Module BcTS can be monitored as a single workstation in this version SOH and responses apply to all circuits

8. LabMinder Module LabMinders can monitor other LabMinders – In case something bad happens to the LabMinder PC (dead power supply, etc) Critical LabMinder parameters monitored

9. Module Merge Custom modules can now be merged – Allows easy replication of changes through the system – Make change to master module in Test Manager – Use LabMinder Config to apply changes to all configured workstations

10. Networked Signal Tower Specify a channel and critical values above or below which changes to the lights and buzzers on the signal towers are triggered