1. 200 300 400 500 100 200 300 400 500 100 200 300 400 500 100 200 300 400 500 100 200 300 400 500 100 General Engineering TransportationCommunicationsManufacturingStructures

2. Materials and Tools Used to create the most accurate hole for each leg of a stool or chair.

3. Materials and Tools What is a drill press?

4. Materials and Tools The four parts of the Universal System Model

5. Materials and Tools What is Input, Process, Output and Feedback?

6. Engineering Design When considering an iron as an example of a system, it is the input.

7. Engineering Design What is electricity?

8. Engineering Design Identify the need or want.

9. Engineering Design What is the first step in Design Process?

10. Engineering Design

11. What is an orthographic projection of a cylinder?

12. Transportation A system that is used to move people and products.

13. Transportation What is transportation technology?

14. Transportation When the product must be delivered a long distance soon after it is made.

15. Transportation When is it advantage to ship a product by plane rather than by truck?

16. Transportation Engine of a car or truck

17. Transportation What is the propulsion system?

18. Transportation The four forces of flight.

19. Transportation What is Lift, Gravity, Thrust and Drag?

20. Transportation The type of design of a car or plane that reduces drag.

21. Transportation What is Aerodynamic?

22. Communications The part of a communications system that sends a message.

23. Communications What is the transmitter or transmission?

24. Communications Changing an analog signal into a radio signal to be transmitted.

25. Communications What is Encoding?

26. Communications The part of a communications system that receives a message.

27. Communications What is the receiver or reception?

28. Communications Changing a radio signal into an analog signal that is being received.

29. Communications What is Decoding?

30. Communications A device to relay a message from a transmitter to a receiver that is very far away.

31. Communications What is Satellite?

32. Manufacturing Artificial leg versus a light bulb

33. Manufacturing What is custom-made product versus a mass produced one?

34. Manufacturing Performed by the Quality Control division of a company.

35. Manufacturing What is Inspecting the finished product?

36. Manufacturing The division of a company that is most responsible for getting the finished product to the stores

37. Manufacturing What is Distribution ?

38. Manufacturing The activity performed by the marketing department of a manufacturing organization

39. Manufacturing What is Advertising ?

40. Manufacturing The manufacturing process used to permanently put parts together

41. Manufacturing What is Assembling?

42. Structures Foundation

43. Structures What is the part of a house associated with the words excavation, slab, and footing?

44. Structures This illustration shows sheets of plywood that are nailed to floor joists

45. Structures What is Decking?

46. Structures The force that tends to pull or stretch when a weight is placed on a bridge

47. Structures What is Tension?

48. Structures The force that tends to push or squeeze when a weight is placed on a bridge

49. Structures What is Compression ?

50. Structures The four basic types of bridges.

51. Structures What is Arch, Beam, Truss, and Suspension?