1. ABSORPTION

2. What is Absorption?
Absorption is the transfer of one or more materials from the gas phase to a liquid solvent
It is typically a physical phenomenon and often involves no change in the chemical species present in the system
It is an important mitigation method

3. Terminology
Solute:- It is the material that is transferred from the gas to the liquid phase
Liquid desiccants:- Liquid solutions that have the property of absorbing moisture from air, e.g., lithium chloride and triethylene glycol
Scrubbing:- Another term for absorption
Salting out:- Liquid desiccants contain significant amount of water in which the pollutants are dissolved, and presence of certain chemicals like lithium chloride can decrease the solubility of pollutants in water, this phenomenon is known as salting out.

4. Fundamentals
Prediction of performance of absorbers and absorption equipment
The first approach makes use of mass transfer coefficients and depends on the molecular diffusivities of the solute for the equipment in which the operation is being carried out
 The second technique is a graphical solution method
 The third method is described as the absorption factor or overall approach

5. Packed tower La Va
Demister
Liquid distributor
packing Vb Lb

6. Material balance equation
Lb + Va = La + Vb
V – moles of gas phase per unit time
L – moles of liquid phase per unit time
a,b – top and bottom of the contactor, respectively.

7. Desirable properties of Tower packing
 Large void volume to decrease pressure drop
 Chemically inert to the fluids being processed
 Large surface area per unit volume of packing
 Lightweight but strong
 Good distribution of fluids
 Good wettability

8. Tower packing
Tower packings are usually available in a variety of materials, including ceramic, metal, plastic and carbon
The size of an ideal tower packing must not be greater than one-eighth of the tower diameter

9. Packing height
The rate of mass transfer and packing height depend on the area of contact between the phases
The height of a packed tower depends on the properties and flow rates of the contacting streams as well as on the type of packing being used

10. Application of absorption to dehumidification and pollutant control
Temperature and humidity are the key factors in determining the comfort of an environment
A significant reduction in pollutant concentrations can be achieved by controlling the humidity of the space to be air conditioned
Dehumidification and pollutant control can be achieved by absorption using spray columns, fine tube surface type dehumidifier, packing column, liquid desiccant based HVAC systems and absorber-stripper air conditioning systems
Liquid desiccant systems are in use in large commercial buildings only and not in homes or small buildings