1. Micro-machining by Ekkard Brinksmeier, and Werner Preuss Philosophical Transactions A Volume 370(1973):3973-3992 August 28, 2012 ©2012 by The Royal Society

2. Classification of micro-machining processes. Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

3. Schematic of the vertical axis large optics diamond turning machine (courtesy of LLNL). Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

4. Diamond turning of an electroless nickel-plated hyperbolic mirror for a LIDAR system. Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

5. Electroless nickel-plated mould for an F-theta lens. Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

6. (a) A white-light interferometric image and (b) a schematic of a hologram diamond turned into a copper–nickel–zinc substrate with a nanometre stroke ultra-fast tool servo system [17]. Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

7. Scanning electron microscope images of retro-reflective prisms. Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

8. A scanning force microscope image of a diamond-turned electroless nickel surface. Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

9. A scanning force microscope image of a diamond-turned OFHC copper surface. Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

10. Scanning force microscope images of the cutting edge of a diamond tool after cutting (left) iron and (right) copper. Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

11. Precision grinding of a tungsten carbide mould with a fine-grained diamond wheel (courtesy of Moore Nanotechnology Systems). Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

12. The principle of electrolytic in-process dressing (courtesy of RIKEN). Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

13. Truing of coarse-grained diamond wheels within the abrasive layer. Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

14. Crack formation in silicon observed in plunge-cut experiments with a negative rake diamond tool with and without applying hydrostatic pressure [31]. Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

15. Magneto-rheological finishing of an aspheric calcium fluoride lens (courtesy of QED Technologies). Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

16. Molecular dynamics simulation of orthogonal micro-cutting of monocrystalline copper. Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society

17. Molecular dynamics simulation of diamond polishing with a pairing of two {110} faces sliding along the 〈 100 〉 direction with a speed of 30 ms−1 and a pressure of 10 GPa. Ekkard Brinksmeier, and Werner Preuss Phil. Trans. R. Soc. A 2012;370:3973-3992 ©2012 by The Royal Society