1. An Introduction Chairside Software 4.2.3

2. Patient Entry Screen The SAME

3. Patient Database Better!

6. New Material Choices Sirona CEREC Blocs C in inCoris TZI Vita Enamic Suprinity Suprinity FC

7. New Material Choices Ivoclar inCoris ZI meso block Dentsply Celtra Celtra Duo

8. Each Study Club Member Should Discuss Which New Material Is The Most Anticipated Discussion Point

9. New in Configuration Future Use?

10. New in Options

11. Acquisition Phase Changes Scanning and processing time is quicker with Omnicam Rejected images problem fixed for Bluecam Cut tool with Omnicam is faster Addition of GingivaMask Catalogs for upper and lower

12. Each Study Club Member Should Discuss Imaging Techniques and Problems They Have Discussion Point

13. Model Phase Changes Much improved buccal bite stitching Much improved Omnicam margination Model axis alignment determines proposal

15. Model Phase Changes Much improved buccal bite stitching Much improved Omnicam margination Model axis alignment determines proposal Insertion axis now just determines insertion Buccal Bite tools used for scanposts

17. Design Phase Changes Position and Rotate together in one Move tool

19. Design Phase Changes Position and Rotate together in one Move tool Scale B/L, M/D, or whole tooth

21. Design Phase Changes Position and Rotate together in one Move tool Scale B/L, M/D, or whole tooth Can hide/unhide neighbors with Form and Shape tools

24. Design Phase Changes Position and Rotate together in one Move tool Scale B/L, M/D, or whole tooth Can hide/unhide neighbors with Form and Shape tools Can link multiple teeth together to affect the same changes

27. Design Phase Changes Position and Rotate together in one Move tool Scale B/L, M/D, or whole tooth Can hide/unhide neighbors with Form and Shape tools Can link multiple teeth together to affect the same changes Incisal variation tool for anterior teeth

30. Mill Phase Changes Move tool same as in design phase 2 step milling mode

31. Adds Time and Precision

32. Mill Phase Changes Move tool same as in design phase 2 step milling mode New block size options

33. Questions? Discussion Point