1. RightFax and Cisco

2. 2 Cisco Unity Fax Solutions: Unity Fax Server F PSTN Remote Access E1/FXS Exchange Message Store Cisco Unity Messaging Server Cisco Unity Fax Server T.38 Outlook Client Outlook Client Web Client Cisco Call Control Server

3. 3 Brooktrout Fax Boards ► 4 Port Analog Card ► No IP support ► Full size PCI Card ► 8,16,24,32 Port E1/T.38 ► Used in E1 or T.38 Mode ► Full size PCI Card ► Ethernet and E1 Ports

4. 4 IP Network E1 Unity Fax Server TR1034 TDM Configuration Remote Access E1/FXS PBX or Router MCS built-in LAN Brooktrout TR1034 T38 Card |||| MCS Server ► When operating in TDM the Fax Server uses E1 for Fax reception ► Application access is via MCS Network Interface ► Can be used in a TDM/IP migration Q.931

5. 5 Unity Fax Server TR114 Analog Configuration E1/FXS Router POTS Dial-peer for Fax MCS Network Card Brooktrout TR114 |||| SIP MCS Server ► When operating in T.38 mode the Fax Server uses two network connections ► SIP and Application access on MCS Network Interface ► RTP/Media is sent to Brooktrout Ethernet Interface E1

6. 6 RTP Unity Fax Server TR1034 T.38 Configuration Remote Access E1/FXS Router (T.38dial-peer points at MCS Network Card) MCS Network Interface Brooktrout TR1034 T38 Card |||| SIP RTP MCS Server ► When operating in T.38 mode the Fax Server uses two network connections ► SIP and Application access on MCS Network Interface ► RTP/Media is sent to Brooktrout Ethernet Interface E1

7. 7 Unity Fax Server TR1034 T.38 Configuration IOS Router Cisco Fax Server (CFS) ► In this network we want route fax calls from the fax to the CFS server using SIP ► We want to route all 4 digit DNs starting with 5 to the CFS ► We need to build dial peers in the router to achieve this Fax DN=8000 DN=5xxx 10.1.1.0/24.254.207.208 5xxx 8000 FXS

8. 8 Basic Router Configuration hostname Voice_gateway enable password cisco interface FastEthernet0/0 ip address 10.1.1.254 255.255.255.0 duplex auto speed auto no shut line vty 0 4 exec-timeout 120 0 password cisco login Set Host Name Enable Password Ethernet Interface configuration Telnet Configuration

9. 9 PSTN to IOS Inbound Config dial-peer voice 5000 voip description Cisco Fax Server Calls destination-pattern 5... session protocol sipv2 session target ipv4:10.52.200.207 session transport udp codec g711ulaw fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco VOIP Dial Peer Tag Destination Pattern to match Specify SIP as call control protocol IP address of RF Server (NOT BT Card) Configure SIP to use UDP packets Set the default codec for this dial- peer Set Fax relay mode to T.38 Alternatively "voice service voip" and "Voice class codec" could be used for Fax and codec selection

10. 10 Unity Fax Server TR1034 T.38 Configuration IOS Router Cisco Fax Server (CFS) ► We want to route all 4 digit DNs starting with 8 to the PSTN ► We need to build dial peers in the router to achieve this Fax DN=8000 DN=5xxx 10.1.1.0/24.254.207.208 5xxx 8000 FXS

11. 11 PSTN to IOS Inbound Config dial-peer voice 8000 pots destination-pattern 8... no digit-strip port 1/0/0 dial-peer voice 1 voip description generic incoming dial-peer incoming called-number.T codec g711ulaw fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco POTS Dial Peer Tag Destination Pattern to match Specify SIP as call control protocol Inbound VOIP dial-peer Match all in bound VOIP Calls Set the default codec for this dial- peer Set Fax relay mode to T.38 Alternatively "voice service voip" and "Voice class codec" could be used for Fax and codec selection

12. 12 Unity Fax Server Call Manager Deployment Cisco Call Manager Multi-Function Document Device Cisco Fax Server Messaging Server Cisco Unity Server Fax Client H.323 SIP(T.38) Email Client

13. 13.208 Unity Fax Server TR1034 T.38 Configuration IOS Router Cisco Fax Server (CFS) ► If we need to also route calls to a Cisco Call manager we add a H.323 dial-peer to the router Fax DN=8000 DN=5xxx 10.1.1.0/24.254.207 5xxx 8000 FXS Call Manager IP Phones 2xxx.201

14. 14 PSTN to IOS Inbound Config dial-peer voice 2000 voip description Dial-Peer to Call manager destination-pattern 2... session target ipv4:10.52.200.201 codec g711ulaw POTS Dial Peer Tag Destination Pattern to match IP Address of Call Manager Set the default codec for this dial- peer Alternatively "voice service voip" and "Voice class codec" could be used for Fax and codec selection