Download presentation
Presentation is loading. Please wait.
Published byClementine Clarke Modified over 9 years ago
1
1 INTRODUCTION TO THE PHYSICS OF DIAGNOSTIC IMAGING Outline of Course Brief History Common Terminology Imaging Modalities
2
2 TECHNOLOGICAL DEVELOPMENTS 1895Roentgen discovers x-rays x-ray tubes Film Film/screen 1950'sImage Intensifiers 1960’sMammography 1970'sComputed Tomography (CT) Ultrasound (US) 1980'sMagnetic Resonance Imaging (MRI) Digital Subtraction Angiography (DSA) Computed Radiography (CR) 2000'sDigital Radiography (DR)
3
3 TRANSMISSION IMAGING Image consists of a spatial distribution of x-ray flux (spatial modulation of the source flux). –Film Radiography Fluoroscopy –CT –DSA –CR & DR EMISSION IMAGING Nuclear Medicine Single Photon Emission Computed Tomography (SPECT) Positron Emission Tomography (PET)
4
4 Transmission Imaging This is the basic setup of x-ray imaging. We will spend a semester discussing different aspect of such x-ray imaging systems. Different arrangements, sources, detectors etc. will be detailed. Source: 1.∞ small 2.∞ intense 3.Monoenergetic/tunable Detector: 1.No image blurring 2.No added noise 3.Complete absorption of photons
5
5 Emission Imaging
6
6 The following provides definitions of some common terms. Radiography The generation of an x-ray image using a single, short (typical 0.1 sec, range 0.005 - 2 sec) x-ray pulse. Several radiographs may be taken for a complete diagnosis. Examples: Chest "film" Extremity "film" Traditionally, radiography is performed with non-real-time detectors. X-rays create a latent image which must be developed (e.g. film and selenium plates (CR)). Very recently, "flat-panel" digital detectors have been introduced in which the latent image is "read" from the detector within a few seconds of formation. Fluoroscopy The generation of a continuous stream of images using continuous x- rays (or a train of x-ray pulses (e.g. 30 pulses/sec)). Fluoroscopy requires a real-time detector. Traditionally, this has been an image intensifier coupled to a video camera. Examples: Patient positioning for GI radiographs Catheter placement Interventional procedures Fluorography "Fluoroscopy" is generally used to describe procedures in which the images, having been used during the procedure, are not recorded. The same equipment can be used to record images for diagnostic purposes. This is sometimes referred to as "fluorography". Examples: Cine angiography Digital Subtraction Angiography (DSA) l 100-mm Photospot
7
7 Mammography is the process of using low energy X-rays to examine the human breast. It is used to detect different types of tumors and cysts. Digital Radiography Instead of using film, digital radiography converts x-ray images to electronic data that can be viewed on a monitor and stored on computer in digital formats. The technique allows specific areas of the image to be enlarged, and the contrast of the image can be adjusted to allow greater visibility.
8
8 Projection Imaging Images in which the body's 3-dimensional distribution is projected onto a 2-dimensional image. Example: Radiography Fluoroscopy Tomographic Imaging Images in which the body's 3-dimensional distribution is retained. Example: CT MRI
9
9 Projection Imaging (Fluoroscopy)
10
10 Tomographic Imaging
11
11 Characteristics of Different Modalities
12
12
Similar presentations
© 2024 SlidePlayer.com. Inc.
All rights reserved.