Download presentation
Presentation is loading. Please wait.
Published byGrant Morris Modified over 9 years ago
1
A New Equivalent Circuit Extraction Method For Quasi-static Regions Benjamin D. Braaten Dr. Robert M. Nelson Yuxin Feng North Dakota State University
2
Topics Introduction Computing the equivalent circuit Validation Conclusion North Dakota State University
3
Introduction Recently, Electric Field Integral Equations (EFIE) were developed for evaluating problems with [1] electrically large regions (full-wave regions) electrically small regions (quasi-static regions) geometrically complex quasi-static regions thin-wire full-wave regions But, problems with a large number of quasi-static regions (>4) have resulted in a long computation time [1]. North Dakota State University [1] B.D. Braaten, R.M. Nelson and M.A. Mohammed, “Electric field integral equations for electromagnetic scattering problems with electrically small and electrically large regions,” IEEE Transactions on Antennas and Propagation, Vol. 56, No. 1, January 2008, pp. 142-150
4
Introduction This has lead to the development of modeling these quasi-static regions as equivalent circuits [1],[2]. This will allow the quasi-static regions to be represented as equivalent circuits in fast efficient full- wave solvers such as Mininec [3]. North Dakota State University [1] B.D. Braaten, R.M. Nelson and M.A. Mohammed, “Electric field integral Equations for electromagnetic scattering problems with electrically small and electrically large regions,” IEEE Transactions on Antennas and Propagation, Vol. 56, No. 1, January 2008, pp. 142-150 [2] R.G. Olsen, G.L. Hower and P.D. Mannikko, “A hybrid method for combining Quasi-static and full- wave techniques for electromagnetic scattering problems,”IEEE Transactions on Antennas and Propagation, Vol. 36, No. 8, pp. 1180-1184,August 1988. [3] J.W. Rockway and J.C. Logan, “The New MININEC (Version 3): A Mini-numerical Electromagnetics code,” U.S. Department of Commerce National Technical Information Service, Springfield, VA September 1986, pp. 1-21.
5
Introduction In this work we introduce a method for determining the equivalent circuit of a quasi-static region based on work by Mayhan et.al. [4]. This method can then be used to determine the equivalent circuit of a quasi-static region that may not have a convenient analytical method for evaluating the equivalent circuit. North Dakota State University [4] J.T. Mayhan, A.R. Dion and A.J. Simmons, “A technique for measuring antenna drive port Impedance using backscatter data,” IEEE Transactions on Antennas and Propagation, Vol. 42, No. 4, April 1994, pp. 526-533.
6
Computing the equivalent circuit First, consider the following equation: North Dakota State University antennaadmittance scattered field from open circuit known load admittance scattered field from known load scattered field from short circuit (1)
7
Computing the equivalent circuit Rearranging (1) and using impedance values we get: North Dakota State University impedance attached to the port of the antenna scattered field from open circuit known antenna input impedance scattered field from unknown load scattered field from short circuit (2)
8
Computing the equivalent circuit Step 1: Redefine the quasi-static region at the port of a test dipole with a known input impedance and calculate.
9
Computing the equivalent circuit Step 2: Remove the quasi-static region at the port of the test dipole with a known input impedance and short the terminals to calculate. North Dakota State University
10
Computing the equivalent circuit Step 3: Remove the short at the port of the test dipole and open the terminals to calculate. Then use (2) to calculate the equivalent circuit of the quasi-static region. All computations can be performed in QUICNEC [1]. North Dakota State University
11
Validation The first problem chosen to validate the method presented here was a capacitively dominant quasi- static region. North Dakota State University
12
Validation Using the scattered field method an equivalent circuit of R o =0 and C o =.32pF was calculated. This problem also results in an analytical equivalent circuit approximation of.28pF (epsilon A/d). North Dakota State University
13
Validation The following two problems were then defined in QUICNEC and Mininec for validation.
14
Validation North Dakota State University This resulted in the following input reactance.
15
Validation The second problem used to validate the method was a two insulator wire problem. This problem was chosen because is may not be very easy to calculate an equivalent circuit analytically. North Dakota State University
16
Validation Using the method described here an equivalent circuit of R o =1251 Ohms and C o =.00692pF was calculated. This resulted in the following induced current at 1340 KHz. The equivalent circuit was defined in Mininec.
17
Computation time North Dakota State University First problem: QUICNEC 57 seconds and Mininec <1 second. Second problem: QUICNEC 6 minutes and Mininec < 1 second.
18
Conclusion North Dakota State University A method for determining the equivalent circuit based on various scattered fields has been presented. Two problems have been chosen to validate the method a capacitively dominant quasi-static region a quasi-static insulator It has been shown that this method can be used to accurately model quasi-static regions in Mininec. Finally, a significant savings in computation time is observed.
19
Questions Thank you for listening North Dakota State University
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.