Download presentation
Presentation is loading. Please wait.
Published byBeverley Chandler Modified over 9 years ago
1
Water Tank as the Outer Muon Veto Mingjun Chen 2006-06-10@IHEP
2
2 Outline Past work As the muon veto MC simulation Future Plan
3
3 Schematics of a water tank. Material of water tank : PVC Size : 1m×1m×13m Shape of two ends : Winston Cone Inner wall covered by 1070D Tyvek and Al film with 90% reflectivity 8-inch photomultipliers installed in two ends as the photons’ collectors Clean de-ionized water (>10MΩ· cm ) is used A simple water purification system with 0.1μm filter We built a water tank prototype: Middle point of water tank is set as the origin of coordinate system
4
4 Water Tank Prototype
5
5
6
6 Position Dependent Response of the Water Tank The muons vertically pass through the prototype at the different positions X is the distance from the trigger counters to the PMT at right Effective absorption length of the water tank: 5.74+/-0.29(m) Energy Res. 7%/Sqrt(E(GeV))
7
7 Angular Dependent Response of the Water Tank The track lengths of all data points are normalized to 1m at x=0.5m Muons pass through the prototype with different angles
8
8 Elevation: Use water tank as the muon veto
9
9 Two 8-inch PMTs Al Mirror Reflector 16m Top View: Tyvek
10
10 Advantages of Water Cherenkov Detector Compared with RPC and plastic scintillator Good detection efficiency(about 100% theoretically ) Not sensitive to the natural radioactivity of Daya Bay’s rock Simple machine( the tanks immersed in water) Very low cost ( Use water as the media)
11
11 MC simulation To study the detection efficiency of Cherenkov photons Based on GEANT4 and including the detailed optical model The parameters of optical model come from the MC simulation program of the prototype
12
12 Some parameters of MC simulation program:
13
13 Number of Detected photoelectrons (m)(m) X is the incident position of the vertical mouns 10 muon run @1Gev
14
14 Future Plan on the prototype: Look for new reflector instead of Tyvek For example: reflective paint Two PMTs installed in each end of water tank Redesign the optics collection system of two ends ☺Use lens system Better water purification system
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.