1. By : Anand Kochhar Video Conferencing

2. End User Training on Tandberg-990MXP By Anand Kochhar Mobile:- 9810619400 Video-0120-254010

3. Tandberg 990 at a Glance

4. Back Plane

5. Back Plane Interface

6. Remote Control Details

7. General Use

8. Navigation Key

9. Making a Call

10. Making a Audio/Video Call

11. Adding Multisite

12. Answer the Call

13. End the Call

14. Directory

15. Moving Camera

16. PIP & POP

17. On Screen Indicators

18. Control Panel

19. User Guide In-Build

20. Hands On Session Place a point to point call 2.Control the camera (pan/tilt/zoom) 3.Control the far end camera 4.Turn the microphone on and off 5.Disconnect the call 6.Call a system listed in the ‘directory’

21. Remote Control Features To make a call To disconnect a call To bring up directory Directional keys to move camera and for menu scrolling Menu/OK button Presentation button: PC, DVD, Aux cam etc Layout button

22. Moving the Camera The zoom button allows you to zoom in and out on people or objects The directional arrows will allow you to move the camera. If you are in menu mode, they will allow you to scroll through the menu Use this to adjust volume from speakers

23. Various Buttons  Microphone on/off button. When your mic is off, you will see an icon on the screen:  Selfview button is used to see what image you are sending to the far side  The telephone key pad, similarly to a mobile phone, is used to dial numbers  Microphone on/off button. When your mic is off, you will see an icon on the screen:  Selfview button is used to see what image you are sending to the far side  The telephone key pad, similarly to a mobile phone, is used to dial numbers

24. Making a Call

25. Accessing the Directory Use the arrow keys and keypad to add, delete or edit directories

26. Changing the Screen Layout  Press the layout button several times to scroll through various layouts seen above

27. Presentations  Easy access to presentations. This key is programmable to any external source. As default, it is set to PC  To activate other video sources, press menu, then presentations

28. Far End Control Far end camera gives you the ability to access the remote camera and video sources Step 1 Step 2

29. Storing Presets To set a preset:  Make sure you have no menus up  Move camera to desired position  Store position by pressing any of the numbers 0-9 for about 2 seconds  N.B Presets don’t only have to be for the camera. They can be used to access peripheral devices

30. Accessing Presets When in a call, press any of the numbers 0-9 depending on which preset you wish to access

31. Q & A Anand Kochhar HCL Infinet Ltd. Noida.