1. Roller Table Motors (High Efficiency)  Suitable for VFD application  Specially designed for severe applications such as laminators WEG has a wide range of electric motors specially designed to meet each application requirements. WEG has developed an advanced system for Roller Table operation with a low maintenance motor, built with FC200 gray iron, specially designed to meet Siderurgy’s severe requirements.

2. Advantages: High Efficiency Motor for better performance and energy consumption reduction. Sealing system W3 Seal, highly effective against both water and dust accumulation and entrance. Double sealing on conduit box cover and terminal box. Exclusive WISE insulation system (WEG Insulation System Evolution), with WEG GIII 200ºC enameled wire designed for aggressive environments where humidity is constant. Suitable for VFD application. Double impregnation with water base varnish. (Environmentally friendly). Roller Table Motors (High Efficiency)

3. Features: Frames: 132M, 160L, 180M, 200L and 225S/M** Class of Insulation: “H” Double sealing with cable glands Terminal Block Thermistors PT-100 / Thermostat (optional) **Other frames under request Advantages: Special internal paint for environments with excessive presence of steam and external paint with Polyurethane finishing (painting plan 204), preventing against corrosion and increase motor’s life. Shaft, fixing bolts and nameplate made of stainless steel, suitable for areas with excess of water and steam, corrosion resistant. Radial and circular fins preventing against accumulation of material and water on the motor. Roller Table Motors (High Efficiency)