1. Moving pilots, motorists and pedestrians in the right direction…safely. Airfield Pavement Markings P R E F O R M E D T H E R M O P L A S T I C

2. 2 Application of Surface Painted Hold Position Sign: A cumbersome process with paint or epoxy due to masking multi-colors

3. 3 A durable preformed thermoplastic pavement marking material that is specially formulated for airfield applications. I N T R O D U C I N G… Preformed Thermoplastic AC 150/5370-10E Item P-620 Specification for Runway and Taxiway Painting

4. 4 AirMark ® is supplied in rolls for easier and faster layout

5. 5 MARKINGS – BEST PRACTICES ■ Safety - reduce runway incursions and vehicle pedestrian deviations - reduce frequency of remarking time and labor intensive multi-colored surface signage ■ Uniformity - quick recognition of familiar markings - establish standard multi-colored marking procedures ■ Durability - lasts at least 8 to 12 times longer than paint - enhance life cycle cost benefit ■ Quality - built into the marking at time of manufacturing for consistent control - UV resistant; colorfast pigments meet FAA expectations - retroreflective glass beads intermixed throughout the material - clean, crisp appearance

6. ► Packaged conveniently in rolls for efficient application ► Retroreflective glass beads throughout material ► 65-mil thickness for uniform application ► Resistant to aviation fuels, motor fuels, lubricants, deicers ► Can be applied to asphalt and/or portland cement concrete (including Green concrete). ► Opened to traffic maximum 15 minutes after application ► White, yellow, red pigments meet DOT/FAA/AR-TN 03/22 ► Applied with large infrared heater by Certified Applicators Preformed Thermoplastic Pavement Markings For Airfield Applications

7. 7 Preformed Thermoplastic Pavement Markings Installation with Large Infrared Heater Prepare Surface Position Material Heat Material

8. Preformed Thermoplastic Pavement Markings Installation with Large Heater

9. Preformed Thermoplastic Pavement Markings Advantages and value pronounced in multi-color markings Geographic Position Runway Holding Position ILS Holding Position Surface Holding Position Location Enhanced Taxiway Centerline Taxiway Centerline Non-Movement Area Boundary Direction SIDA

10. Chris Brooks Vice President – Specialized Markets Office: (336) 475-6600 Cell: (336) 337-7526 cbrooks@flinttrading.com Flint Trading, Inc. 115 Todd Court Thomasville, NC 27263 (336) 475-6600 www.flinttrading.com For More Information