1. „Moderné vzdelávanie pre vedomostnú spoločnosť/Projekt je spolufinancovaný zo zdrojov EÚ“ Inovácia obsahu a metód vzdelávania prispôsobená potrebám vedomostnej spoločnosti Art techniques 3D Techniques VYPRACOVAL: Mgr, Vladislav, Kravec November 2014

2. Content Techniques Materials Processes Techniques based on building up process Techniques based on working from one block of material Techniques of assemblage

3. Techniques division Clay modelling Terracotta and Glazed terracotta Casting Woodcarving Stone sculpting Wire Assemblage: plastic, metal, paper, cardboard, textiles, etc.

4. Materials and tools division Clay- air-drying, natural modelling tool (clay tools wood –chisel, wooden hammer (mallet), stone- stone Chisels,hammers http://www.fine-tools.com/veritas-chisels.html http://potteryblog.com/tag/clay/

5. Techniques based on building up process CLAY Stages: 1, an even consistency without air bubbles 2, the wire skeleton or construction must be prepared in order to support the sculpture 3, Then you can start adding pieces of clay 4, shape the form of the sculpture 5, Make sure you keep your sculpture moistened and covered until you finish. http://www.blacksburgbelle.com/2013/10/clay-date/

6. Processes CASTING CASTING 1,The sculpture can be duplicated by casting into laster, bronze (metal), plastic and other materials. 2,preparation of the hollow form called the mould. 3, once the mould ready for casting (especially the plaster one), we need to apply the substance called release agent 4, Then we pour the casting liquid 5, Finally we take the casted sculpture out.

7. Processes Fired Terracotta When we make pottery or we do modelling with natural clay used for firing we can decorate it with colour glazes and then fire in the oven called kiln.

8. PROCESSES Techniques based on working from one block of material Woodcarving Stone sculpting

9. Processes Techniques of assemblage Many materials such as plastic, metal, textiles, paper, cardboard, glass can be assembled into one piece. To join variety of materials or objects in order to make a sculpture. To join materials is used glue, soldering iron,wire, welding machine, hot air gun, hot-glue gun and sewing machine.

10. Sources http://www.topchinatravel.com/pic/city/xian/ attractions/Qin-Terracotta-Army-3.JPG http://www.topchinatravel.com/pic/city/xian/ attractions/Qin-Terracotta-Army-3.JPG http://www.woodcarvingillustrated.com/fil