1. 48 hour tool
Step by Step

2. Purpose of 48-hour tool Available for NC and RC
Removal of placed implant from patient
Substitute for transfer part  after transfer part failure
Implant needs to be discharged after removal
Can be done up to 48 hours after placement, afterwards osseointegration is too far advanced!
Do not use for height correction
Mention off-label use: Height correction during implantation.
Education

3. Situation
Implant stuck & transfer piece breaks
Education

4. Situation Implant stuck & transfer piece breaks
Transfer part has predetermined breakage point:
RC: 100 Ncm
NC: 80 Ncm
Up until this point, the internal connection will not be damaged
The breakage point is located at the head of the transfer screw
Education

5. Removing the Implant
Remove adapter with
screw head
Education

6. Removing the Implant
Remove transfer nut from implant (no unscrewing needed)
The remaining screw remains secure within the implant
CAUTION
Make sure the transfer nut is not aspirated
Education

7. Removing the Implant
Remove remaining screw with tweezers or pliers by counter clockwise rotations
CAUTION
Make sure the remaining screw is not aspirated
Education

8. Removing the Implant Mount 48-hour tool like an abutment
Secure tool by hand-tightening the mounting screw
Education

9. Removing the Implant Mount ratchet and slowly unscrew implant
Remove and sacrifice the implant
Education