Download presentation
Presentation is loading. Please wait.
Published byAnnabelle Banks Modified over 9 years ago
2
‘Rig’ components Audio Amplifier/Speaker Stimulator DC Strain Gauge Amplifier AC Amplifier AM Amplifier Analog Oscilloscope Power Supply
3
Metal plate is on tennis balls for vibration isolation.
4
Cables/Connections Banana plugs BNC cables Alligator Clips Adapters BNC-to-Alligator BNC-to-Banana (male/female) Combinations (male/female) Splitters BNC – ‘T’ Head Stage AC Head Stage (male-female) DC Head Stage (female-female) Strain Gauge
17
Other Equipment Pipette PullersStroboscope
18
Signal Analysis System Setup Adapters: 2 T’s, 3 BNC’S Plug in equipment Signal generator to oscilloscope Ch 2 Adapters: alligator-to-BNC Connect to oscilloscope channel 2 Head Stage connected to AC amplifier Connect AC Amp output (via T and BNC) to three data analysis devices To audio amp A/V adapter on rear To 0scilloscope (channel 1) To PC: connect to Ch 0 on rack (upper left) Work through part one of the electronics orientation handout
19
Audio AC Amp AM Systems AMP DC AMP Power supply Stimulator Oscilloscope VI input Headstage (input) G1 G2 Com Stimulus Generator Input Output Using alligators, ground plate to cage and cage to rack
20
Make sure signal generator is off, remove connection from oscilloscope Connect to signal generator to AC headstage Alligator to G1 and G2, not COM Before turning on signal generator, check level of amplification- set amplifier to lowest amplification. Work through part two of the equipment testing handout PLEASE HAVE SOMEONE CHECK YOUR SETTINGS BEFORE TURNING ON AMPLIFIER
21
Audio AC Amp AM Systems AMP DC AMP Power supply Stimulator Oscilloscope VI input Headstage (input) G1 G2 Com Stimulus Generator Input Output Using alligators, ground plate to cage and cage to rack
22
Get your electronics set before getting the specimin Is it plugged in? Is it turned on? Check connections Check grounds (plate to cage, cage to rack) Is your amplification correct? Check settings in handout Is your scaling (time base and gain/voltage) correct? You can check the connections and settings on the demo rig or on a classmate’s rig.
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.