1. Robust Heavy Ion Fusion Target Shigeo KAWATA Utsunomiya Univ. Japan U.S.-J. Workshop on HIF December 18-19, 2008 at LBNL & LLNL

2. Acknowledgments Thanks for Collaborations with Grant, John & Friends in VNL for WDM/HEDM physics + HIF with wobblers! Colleagues in HIF Japan, Sasho, Jacob JSPS & MEXT, Japan

3. / High  d ~ 30~40% / Robust driver with a high rep. / Beam handling / Spherical target with a hybrid implosion / Robust implosion

4. Advantages of HIF Scheme / High efficiency ~30~40% => Gain~30 with ~10Hz operation / Simple energy deposition / Robust against R-T instability <= large density gradient Large scale Small scale 0 20 40 60 80 1.52.53.54.55.5 r [mm]  [g/cm 3 ] Without foam in 25.2nsec With foam in 25.1nsec

5. 0 20 40 60 80 1.52.53.54.55.5 r [mm]  [g/cm 3 ] Without foam in 25.2nsec With foam in 25.1nsec Without foam Incident beam : 34 [ns] 7 [MJ] Nonunifomity : 2.0 [%] Maximum incidence angle : 30 [degree] With foam Incident beam : 34 [ns] 7 [MJ] Nonunifomity : 4.0 [%] Maximum incidence angle : 40 [degree] No 11 Comparison of space profiles of density The Density Valley is Widened by inserting the foam.

6. Histories of growth rate of the R-T instability with foam No 20 With foam Incident beam : 34 [ns] 7 [MJ] Maximum incidence angle : 40 [degree] Estimation of the R-T Instability growth

7. Introduction - Problems of ICF - Wobbling HIBs => time-dependent energy deposition  E => time-dependent non-uniform acceleration:  g Flow of inertial confinement fusion 7

8. The Rayleigh-Taylor Instability (RTI) When a low density fluid supports a high density one under gravity, the fluid instability is caused. This instability is so called the Rayleigh-Taylor Instability (RTI). The growth rate of the RTI is gravity ρ 1 <ρ 2 high density low density 2π/k 8

9. RTI induced by non-uniform gravity A non-uniform acceleration (gravity) is generated by non-uniform illumination of heavy ion beams. Because the beam number is finite. 9 The gravity is expressed by the constant term and the non-uniform term, in this study. ion beam target

10. RTI induced by non-uniform gravity 10 time

11. Simulation model - constant gravity - density gravity 0.0 5.0 10.0 ρ The calculation parameters are

12. Simulation result - constant gravity - 0.0 1.0 0.0 1.0 x [2π] y [2π] den sity 3 10 ρ t=0~6 [1/γ] gravity 12 The RTI is grown by the initial unstable density and the non-uniform gravity distributions.

13. HIB axis can be oscillated with a high frequency -> Control of RTI - Oscillating gravity - x gravity Oscillation Gravity 13 From the equation, when the gravity oscillation frequency f increases, the RTI perturbation velocity w decreases.

14. Control of RTI - Oscillating gravity - x gravity Oscillation Gravity 14 The RTI perturbation velocity is approximately written by <-. From the equation, when the gravity oscillation frequency f is increased, the RTI perturbation velocity w decreases.

15. 0.0 1.0 0.0 1.0 x [2π] y [2π] 0.0 1.0 0.0 1.0 x [2π] y [2π] vorticitydensity Single Mode Simulation [constant gravity] t=0~6 [1/γ]

16. t=5 [1/γ] densityvorticity Single Mode Simulation [constant gravity]

17. x [2π] gravity 1.0 1.1 0.9 0.00.5 1.0 gravity Single Mode Simulation [oscillation gravity] parameter density gravity

18. density vorticity Single Mode Simulation oscillation (γ[Hz]) t=5 [1/γ]t=9 [1/γ]t=7 [1/γ]

19. Single Mode Comparison (γt=5) densityvorticity oscillation (γ[Hz]) constant

20. f=1[γ] f=10[γ] constant f=1[γ] f=10[γ] constant f=1[γ] f=10[γ] Single Mode Comparison (passage of time)

21. Multi Mode Simulation [oscillation gravity] parameter 0.0 1.00.5 0.9 1.0 1.1 x [2π] gravity

22. Multi Mode Comparison (t=5 [1/γ]) densityvorticity oscillation (γ[Hz]) constant

23. Al pellet structure Al 1.00mm 2.69g/cm 3 Illumination of Wobblers Parameters Pb + ion beam Beam number : 12, 32 Beam particle energy : 8GeV Beam particle density distribution : Gaussian Beam temperature of projectile ions : 100MeV with the Maxwell distribution Beam emittance : 1.0 mm-mrad External pellet radius : 4.0mm Pellet material : Al

24. 1.5~3.0mm Rotation radius Pellet radius 4.0mm Beam radius 1.5~4.0mm Rotation radius 1.5mmRotation radius 2.0mm Rotation radius 3.0mm

25. Rotation radius 1.9mm Beam radius 2.6mm 2.3 % Rotation radius 3.0mm Beam radius 3.2mm 3.2 %

26. 32 beams Rotation radius 1.9mm Beam radius 2.6mm 2.32% 32-HIBs illumination system 32-beam 12-beam 12 beams Rotation radius 1.9mm Beam radius 2.6mm 8.29% mm 12-HIBs illumination system

27. Mode(2,0) Mode(1,0)Mode(1,1) Mode(2,1) Mode(2,2)

28. Summary The Rayleigh-Taylor Instability growth can be reduced by the oscillating gravity (acceleration), that may be realized by wobbling HIBs. The reduction ratio of the RTI growth depends on the frequency of the gravity oscillation. Even in the case of the multi mode gravity perturbation, the RTI growth is reduced by the wobbler. 28

29. Wobblers may bring a robust uniform target implosion.

30. Issues in HIF / Particle Accelerator (Scale, Cost, Energy, etc..) / Physics of Intense Beam (Focusing & Compression, Emittance growth, etc..) / Beam Final Transport (Stable transportation, Interaction with gas, etc..) / Target-Plasma Hydrodynamics, stability, beam illumination scheme, robustness, ignition, burning, … / Reactor design, wall, T breeding, molten salt, material, neutronics, … etc.. Proposal of a Conceptual Design of International HIF Reactor?!? International Collaborative Work! i-HIF Reactor Accelerator Ion Beam chamber target

31. 31 IFE reactor HIB illumination non-uniformity < a few % Pellet injector Fusion reactor Reactor chamber center Displacement dz 3.00×10 4 8.14×10 4 1.33×10 5 1.84×10 5 2.36×10 5 (a) dz = 0[  m] (b) dz = 100[  m] [J/mm 3 ] Fuel Pellet Conventional illumination pattern => ~ 50-100  m => non-uniformity > 3.0% Our results => ~ 300-400  m is allowable Previous work on uniform HIB illumination  dv r R bea m Fuel pellet RchRch f f min f max RfRf Focal Spot Forward focal position Backward focal position RenRen

32. Sample (beam profile) Simulation [constant] gravity parameter beam profile P n gravity 1.1e+11 1.0e+11 0.9e+11 gravity [m/s 2 ] 0.0 0.9 0.30.6 x [mm]

33. densityvorticity oscillation (γ[Hz]) constant Sample (beam profile) Comparison (t=0.2 [μsec])