1. FIRE SERVICES AT DATA CENTRE

2. FM200 TRAINING COURSE

3. Introduction of FM 200

4. THE PROPERTIES OF FM-200®

5. ASHRAE Designation = HFC227ea
WHAT IS FM-200® ? C F H
ASHRAE Designation = HFC227ea

6. THE PHYSICS OF FIRE Fire Triangle Fuel, oxygen, heat What is fire?
A series of highly exothermic chain-branching free radical reactions
Removal of any element of fire triangle results in suppression

7. Fast & Efficient Performance
Removes heat, so fire can’t sustain itself

8. FM-200® CHEMICAL/PHYSICAL EXTINGUISHING MECHANISM
80%
20%
Halon 1301
FM-200®

9. How is FM-200® Applied? Cup Burner Conc. [Heptane] - 5.8%
Use Concentration [Minimum] - 7.5% for ISO compliance
Maximum Discharge Time limited to 10 Seconds

10. FAST & EFFICIENT PERFORMANCE
Compact storage space requirements
Halon 1301 CO
Inert Gas

11. HUMAN SAFETY
FM-200® is
completely safe
for use in occupied
spaces.

12. FM-200® IS FAST & EFFECTIVE
Reaches extinguishing concentration
within 10 seconds
Provides ACTIVE Fire Protection
FM-200® IS FAST & EFFECTIVE

13. FM-200® ENGINEERED SYSTEMS

14. ENGINEERED CENTRAL STORAGE FM-200® SYSTEM
Distribution Pipe
Smoke Detectors
Discharge Nozzles
Containers
Manual
Station
Raised Floor

15. PRIMARY APPLICATIONS
Computer Rooms

16. 3M™ Novec™ 1230 Fire Protection Fluid
Novec 1230 fluid has distinct environmental benefits
Ozone depletion potential (ODP) of 0
5 day atmospheric lifetime
Global Warming Potential (GWP) of 1
THE NEW CLEAN AGENT

17. FM200 CONTROL EQUIPMENT

18. FM200 CONTROL EQUIPMENT
Kentec Panel
Kentec lock off

19. FM200 CONTROL EQUIPMENT
Kidde Panel
Kidde Panel

20. Viking & Notifier Panel
FM200 CONTROL EQUIPMENT
Chubb Panel
Viking & Notifier Panel

21. FM200 CONTROL EQUIPMENT
Thorn Panel

22. FM200 CYLINDER

23. FM200 CYLINDER
Kidde FM200

24. FM200 CYLINDER
Chemetron FM200

25. FM200 CYLINDER
ThornFM200

26. FM200 CYLINDER
Fike FM200

27. FM200 CYLINDER
Siemens FM200

28. Signage Box and Pressure Switch
Pressure Switch for Fed-back Signal

29. Mode Selection - “System Inoperative” Signal Box Flash
AUTO-MANUAL Mode Selection Provided Next to the Panel Outside the Room
When Personal Before Enter the Room:
- Switch the Auto-Manual Switch to “MANUAL”
- “System Inoperative” Signal Box Flash
- Switch Back to “AUTO” when Leave the Room

30. FM200 Operation In Auto Mode
Two Detection Zones for Each System
Cross Zone Operation
Activating Anyone Zone:
- Alarm Sound
- “Do Not Enter” Sign Flash, Don’t Enter the Room

31. FM200 Operation in Auto Mode
Two Zones Activated:
- Two-Tone Sounder Raised
- “Evacuate” Sign Flash, Evacuate Room Immediately
- A/C in the Room Will Shunt Down
- System Start Count Down for 30 Sec.
- Gas Discharge to Room After Count Down

32. FM200 System Operation in Manual Mode
When Personal Working inside the Room:
One Zone of Alarm Activated and Alarm Sound:
- Check Any Fire Happened in Room
- Inform Others to Leave the Room if Fire Happened
- Go out of the Room, Push the “Manual Release” Switch
to Discharge Gas
Two Zone Activated:
- Evacuate Room Immediately

33. MAINTENANCE OF AFA AND FM200 SYSTEMS
Check Smoke Detectors
- Corrosion
- Dirty
- Generate False Alarm Frequently
Check Modules
- Simulate Tests to Check the Modules
Working Properly

34. MAINTENANCE
Monthly & Annual
- To Be Carried-Out By FS Contractor

35. Introduction of VESDA system
What is VESDA…
Aspirating Smoke Detection 吸气式烟雾探测

36. THEINTRODUCTION OF VESDA SYSTEM VESDA ADVANTAGE…

37. Introduction of VESDA system
VESDA Panel
VESDA Panel

38. Introduction of HSSD system
Kidde HSSD Panel
Kidde HSSD Panel
主機板
鐳射探測器 風機

39. Introduction of HSSD system
Kidde HSSD Sampling Point

40. Introduction of Pre-action system

41. Introduction of Pre-action system

42. THANK YOU

43. END