Presentation is loading. Please wait.

Presentation is loading. Please wait.

Vehicle Crash Test Dong-Un Sul Dr. Granda ME 270.

Similar presentations


Presentation on theme: "Vehicle Crash Test Dong-Un Sul Dr. Granda ME 270."— Presentation transcript:

1 Vehicle Crash Test Dong-Un Sul Dr. Granda ME 270

2 Design Requirements Design appropriate seat belts. Head of Dummy does not travel more than 1 meter in the vehicle. Driver should be safe when vehicle crash test performed. Build Bond graph for the model assigned. Compare outputs from m.files with the results come out from using simulink in matlab.

3 Step 1 Building bond graph

4 Step 2 Obtain the differential equation by hand of the system in the Cauchy form By using campgsym.m, verify the hand derivation Following scanned notes show the differential equations that I derived from the bond graph drawn above.

5

6

7 State Space form From the differential equations verified by matlab, now state-space matrix can be created by hand. State-Space form driven from matlab (campgsym.m) is matched with that which is the next coming slide.

8

9 Critical Max. Velocity When the vehicle travels more than 30mph, dummy can be injured by the force generation. Therefore, parameters of seat belts and bumper must be adjusted in order to avoid driver’s injury when the vehicle travels over 30 mph.

10 No seat belts Without a seat belt, it takes less than a second for dummy to hit the windshield of the vehicle. Following graph shown below indicates how fast dummy gets out of the vehicle when crashed. 25 mph40 mph55 mph 0.105 s0.072 s0.057 s

11

12 Graphs

13 Simulink Scope

14 Best Design For the best design of seat belts, spring constant of bumper should be decreased, and damper R value also should be smaller. If C value of seat belts is the same, R value should go up to 2000. C3 = 1/50000 ; R4 =9000 ; I6 = 1500 ; C9 = (1/10000) ; R10 = 2000 ; I11 = 100 ;

15 Conclusion Bond graph helps engineers save their efforts without setting complicated mathematical equations about actual problems. Matlab can provide a good means to measure different parameters (i.e. velocity, force, so on). Matlab will provide very accurate data that I have expected if I know well how to program in it. However, unlike other software, Matlab sometimes generates some unfixable errors.


Download ppt "Vehicle Crash Test Dong-Un Sul Dr. Granda ME 270."

Similar presentations


Ads by Google