Download presentation
Presentation is loading. Please wait.
Published byClarence Nash Modified over 9 years ago
1
Revegetation of Weed- Infested Plant Communities Jane Mangold Extension Invasive Plant Specialist
2
Begin with the end in mind... Kill the weed—Yes, but not the whole story Healthy plant community that meets management objectives
3
Vicious (and Frustrating) Cycle Treat weed Open spaces (niches) Weed reestablishes from seed bank Treat weed Open spaces (niches) Weed reestablishes from seed bank
4
Traditional Weed Management WEED Biocontrol Revegetation Tilling/disking Mowing Herbicides Grazing Fire Hand-pulling Fertilization Prevention Irrigation
5
Future Management Life cycle of weed Biocontrol Revegetation Tilling/disking Mowing Herbicides Grazing Fire Hand-pulling Fertilization Prevention Irrigation Plant Community Desired Vegetation
6
What caused this? What can we do to cause this?
7
Plant Community Undesired State Plant Community Desired state Necessary Components for Plant Community Change Site Availability Species Performance Species Availability
8
Managing Plant Communities
9
Step 2 Determine Necessity of Revegetation If unsure, contact local Extension, weed coordinator, NRCS, or Conservation District office and schedule a site visit. Is revegetation necessary? Step 1 Make a Goal Statement Describe desired condition. Step 3 Assess Soil and Site Properties Are they acceptable? Can soil be amended or are species available that are adapted to the soil? Step 4 Site Preparation Consider seedbed preparation and/or soil amendments. Are invasive weeds a problem at the site? Stop Revegetation is not recommended. Stop Allow natural recovery. Monitor frequently to identify and rectify problems. Step 6 Design Seed Mix Create seed mix based on goals and site characteristics. Is the site a natural area? Step 7 Determine Seeding or Planting Method Is site accessible to equipment? Step 8 Calculate Seeding Rate Rates vary depending on many factors. Always use native species when their abilities meet your needs. Non-natives are sometimes the only choice when needs are based on considerations like forage production and competitiveness with invasive weeds. Use native species to provide ecological stability and maintain plant community integrity. Hydroseed sloped sites Roughen soil surface before and after broadcast seeding and apply hydromulch Hay mulch seed Plant rhizome sprigs in high- salinity sites. Broadcast seed a non-prepared seedbed at double to triple seeding rate Hand-plug wetland/riparian plants. Step 9 Determine Best Time to Seed Indicated by selected species, method of planting, and soil texture. Step 10 Assist Establishment May include actions that precede or immediately follow seeding/planting. Step 11 Monitor Monitor establishment to identify and rectify problems in time to allow successful revegetation. Step 12 Long-Term Management Carefully manage to favor seeded species. Step 5 Reduce Weed Interference Methods vary depending on many factors. yes no yes no yes no yes no
10
Step 1—Make a goal statement Revegetation –Returning vegetation to a site; little emphasis on amending ecological function Rehabilitation –Returning a site to a functioning state, but not necessarily its original state –Native species not required Restoration –Returning a site to its original, functional state –Native species are required difficult very difficult
11
“Assisted Succession” Restoration of weed-infested rangeland may require multiple steps Cheatgrass/ annual forbs Introduced, competitive grass Native vegetation
12
Example Goal Statements Short-term goals –At the end of YR1, reduce weed cover by 25% and increase desirable grass and forb cover by 25%. Mid-term goals –At the end of YR5, reduce weed cover to 50%. Hand-pulling and or spot treatment is used to control weeds. Long-term goals –At the end of YR10, weeds occur only infrequently (controlled by hand-pulling) and site is dominated by desirable grasses and forbs.
13
Step 2—Determine if revegetation is necessary Sites with >20-30% canopy cover of desired vegetation can usually recover naturally if performance of weeds is hindered Canopy cover = area of ground covered by plant foliage
14
Step 3—Assess soil and site properties Assess soil properties to determine if they are acceptable or can be feasibly amended
15
Soil Properties Soil parameter Ideal condition Acceptable range My soil Acceptable? Yes or No Bulk density (gm cm -3 ) 1.41.2-1.6 Soil texture (%sand, silt, clay) LoamClay loam to sandy loam Salinity—EC (mm/hos/cm soluble salts) 0-2<8 Organic matter (%) >3>2 pH6.5-7.55.5-8.5 SAR (Na:Ca+Mg) <6<12
16
Site Properties Precipitation Temperature Elevation Aspect Soil moisture –sub-irrigated –dry, upland
17
Step 4—Prepare site Seedbed –Firm enough to allow good seed-soil contact –Loose enough to allow seed to sprout and penetrate soil Preparation depends on seeding method –Usually not necessary for drill seeding –Highly recommended for broadcast seeding It’s all about balance!
18
Site Preparation Compacted soil (high bulk density) –Limits air exchange, water infiltration, and number of safe sites –Scarify, till, disk, or plow
19
Site Preparation Chiseling or harrowing Plowing Disking Dragging small chains Limit the amount and intensity of disturbance! –Weed like disturbance! Do so shallowly to avoid nitrogen release disked strips—notice brown, cured cheatgrass
20
Site Preparation Herbicide application Burning Imprinter Create safe sites
21
Site Preparation - Soil Amendments Fertilizer is typically not necessary Organic matter –May also decrease nitrogen availability Mycorrhizal innoculants
22
Step 5—Reduce Weed Interference Herbicides Mowing Grazing Biocontrol Cover crop Late season herbicide application combined with fall dormant seeding (single entry revegetation) Do for a couple years prior to seeding to weaken weeds
23
Herbicide Selectivity Non-selective –Kills/stresses any plant –E.g. Roundup, Journey Selective –Affects some plants, but not all –Tolerance varies from species to species –E.g. 2,4-D, Tordon, Transline, Milestone, most range and wild land herbicides
24
Herbicide Selectivity Roundup Tordon 2,4-D Plateau Transline Milestone >NONE >MODERATE >MODERATE to HIGH >HIGH >MODERATE
25
Single Entry Revegetation
26
Control plot Tested on Russian knapweed in eastern OR Single entry revegetation plot
27
Step 6—Design seed mix Avoid pre-made mixes from unknown or far away sources!
28
Step 6—Design seed mix Customize to meet goals –Forage production –Minimize erosion –Minimize weed invasion and re-establishment –Restore a healthy and diverse plant community Customize to site conditions –Soil properties (e.g. texture, salinity) –Precipitation, temperature, elevation, aspect, soil moisture
29
Seed Mixes Functionally diverse –Grasses –Forbs –Shrubs Species-rich Productive Weed-free, quality seed Increased resource capture and reduced risk of re-invasion
30
Step 7—Determine planting methods Drill –Most often preferred Broadcast –Steep, rocky, or remote sites Hydroseed –Slopes 3:1 or steeper Hay-mulch –Spread hay containing seeds over prepared seedbed “Island” seeding
31
Drill Seeding Seed depth and rate are closely controlled Good seed-to-soil contact Shortcomings –Rows look unnatural –Long, narrow seeds may become lodged in seeder –Species require placement at different depths –Seeds of different sizes separate in box—add carrier such as cracked corn or rice hulls –Drill furrows can enhance erosion— seed along contour
32
Island Seeding
33
Distance to Recruit Patches Reever Morghan et al. 2005. Ecological Restoration 23(3):214-215
34
Step 8—Calculate seeding rate Typically 20-50 seeds/ft 2 Determine rate based on pure live seed (PLS) Determine rate based on seeding method and situation –Increase rate 2-3x for broadcast seeding –Increase 2-3x for weed-infested areas Adjust individual species rates according to its desirable proportion of the mix
35
Pure Live Seed (PLS) Measure used by seed industry to describe the percentage of a quantity of seed that will germinate PLS = %purity X %viability Standardizes quality so puchaser can compare quality and value of different seed lots 100
36
Read the label!
37
Do the math! Lower $/lb., but lower purity and viability = buying more seed to achieve target seeding rate Higher $/lb., but higher purity and viability = buying less seed to achieve target seeding rate
38
Step 9—Determine best time to seed Cool season species –Fall-dormant during late fall Riparian plugs –Warm temperatures, long days, adequate water Late summer planting only if supplemental water is available
39
Step 10—Assist establishment Seedling establishment is most vulnerable stage of revegetation program Implement management to protect sensitive seedlings –Supplemental irrigation –Defer grazing –Mulch
40
Step 11—Monitor progress Identify and fix problems in time to allow for success Level of monitoring increases with severity of site conditions
41
Step 12—Long-Term Management Tailor management to maintain developed plant community May include –Multi-species grazing –Allowing low-intensity disturbance, e.g. fire, proper grazing –Controlling re-establishing weeds
42
Plant Community Undesired State Plant Community Desired state Site Availability Species Performance Species Availability
43
Information adapted from: Revegetation Guidelines for Western Montana: Considering Invasive Weeds by K. Goodwin, R. Sheley, and J. Marks Montana State University Extension Bulletin 170 http://msuextension.org/publications/AgandNaturalResource s/EB0170.pdf $3/copy from Extension Publications (994-3273)
44
Questions? Thank you! For more information: EB0019 “Dryland Pastures in Montana and Wyoming” http://msuextension.org/publications/AgandNatural Resources/EB0019.pdf Jane Mangold, Extension Invasive Plant Specialist –994-5513; jane.mangold@montana.edu
45
Plant Communities Always Change (“Succession”) Process whereby one plant community changes into another. It involves the immigration and extinction of species, coupled with changes in the relative abundance of different plants. - Plant Ecology by M.J. Crawley
46
Initial Plant Community Site Availability Species Performance Species availability Final Plant Community Grazing Fire Revegetation Biological control Grazing Biological control Hand pulling Repeated Spring Grazing Fertilization Mowing/cutting Tilling Hand pulling Herbicide
47
Tilling improved establishment of seeded species in Russian knapweed infestation Mangold et al. 2007
48
Sheley, R. 2007. Weed Science 55:365-370
49
Competitive Effects of Seeded Grasses Seeding Treatment Perennial Grass Biomass (kg/ha) Cheatgrass Biomass (kg/ha) % Reduction Critana thickspike wheatgrass 79291332 Bozoisky Russian wildrye 90073745 Sodar streambank wheatgrass 113520785 Luna pubescent wheatgrass 17140100 Hycrest crested wheatgrass 159612491 Unseeded control---1337 Whitson and Koch 1998
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.