1. What Employees Should Know Division of Risk Management State of Florida Loss Prevention Program

2. Understand the PPE hazard assessment process. Understand why different types of PPE are selected. Know how to properly wear and care for PPE.

3.  Evaluate every job function.  Determine if hazards are present.  Check for hazards to all parts of the body.  Determine appropriate PPE.

4.  Flying particles.  Molten metal.  Hazardous liquids.

5.  Acid or caustic liquids.  Gases or vapors.  Light radiation.

6.  Airborne dusts or particulates.  Vapors or fumes.  Lack of adequate oxygen.

7.  Identify the specific source(s).  Review the work processes.  Monitor the exposure.

8.  Conduct a noise survey.  Monitor impacted employees.  Repeat monitoring.

9.  Falling objects.  Exposed electrical conductors.  Low-hanging obstructions.

10.  Falling, rolling, or sharp objects.  Electrical hazards.  Slippery walking surfaces.  Hazardous materials.  Cold weather conditions.

11.  Skin absorption of harmful substances.  Severe cuts or lacerations.  Severe abrasions.

12.  Punctures.  Chemical burns.  Thermal burns.  Frostbite.

13.  Hot or cold materials or objects.  Hazardous materials.  Welding hazards.  Heavy, sharp, or rough materials.  Moving machinery.

14.  Safety glasses.  Goggles.  Face shields.  Shaded filter lenses.  Prescription eyewear.  ANSI Z87.

15.  Fits comfortably.  Does not distort or block vision.  Put on before exposure.  Clean regularly.  Dispose of when damaged.

16.  Filtering face piece (dust mask).  Air purifying respirator: ▪ Cartridge type.

17.  Air-supplied respirator.  Self-Contained Breathing Apparatus (SCBA).  NIOSH-approved.

18.  Medical approval.  Conduct a fit test.  Inspect before each use.

19.  Check the seal.  Clean regularly.  Store properly.

20.  Earplugs.  Canal caps.  Earmuffs.

21.  Hard hats.  Electrical insulation hard hats.  Bump caps.  ANSI Z89.

22.  Fit properly.  Inspect before each use.  Used only to protect the head.

23.  Steel-toed boots.  Puncture- or slip-resistant soles.  Chemical resistance.  Waterproof and cold-weather footwear.  ANSI Z41.

24.  Fit comfortably.  Inspected before each use.  No cracks or holes in chemical or waterproof boots.  Check soles for excessive wear.  Keep clean.

25.  Chemical-resistant gloves.  Cut-resistant gloves.  Leather work gloves.  Extreme temperature gloves.  Electrical work gloves.

26.  Comfortable fit.  Inspect before each use.  Keep clean and dry.  Discard if damaged or contaminated.

27.  Long-sleeve shirts and long pants.  Flame-retardant clothing.  No loose clothing or jewelry.  Chemical-resistant clothing.

28. Every job function in every department is assessed for hazards. Each part of the body is taken into consideration during assessments. PPE is selected in response to specific hazards. Proper wear and care of PPE is necessary to provide effective protection.

29. For more information on this subject, please contact: Division of Risk Management State of Florida Loss Prevention Program StateLossPreventionProgram@myfloridacfo.com (850)413-4756