1. Report Samples

2. 2 Stop Report Shows where, when and for how long an item has stopped

3. 3 Trip Report (page 1 of 2) Provides summary trip and stop data for one or more items…

4. 4 Trip Report (page 2 of 2) …plus a detail view by item.

5. 5 Fleet Reports Provides a quick snapshot of an entire fleet

6. 6 Route log – with Map Shows an item’s route for a selected time period with address data, and a map view

7. 7 Idle Time Report Calculates the total engine idle time for one or more items for a selected time range

8. 8 Event Detail (page 1 of 3) Provides a detail view for one or more events for selected items, for a selected time period

9. 9 Event Detail (page 2 of 3) Auxiliary Inputs: Configurable for events such as door open/close, dump up/down and PTO engaged/disengaged. Ignition on/off. Panic button. Power cycle.

10. 10 Event Detail (page 3 of 3) Individual tracking locates. Vehicle started moving/ vehicle stopped moving. Zone violation. Speed violation.

11. 11 Landmarks Shows when and for how long item(s) have stopped at a selected Landmark

12. 12 Mileage Summary Provides a summary, by item, of the total distance traveled for all items

13. 13 State by State Mileage Provides an itemized summary of the distance traveled for each item by state

14. 14 Machine Hours Calculates the engine running time for selected items for the selected time period

15. 15 Pending Maintenance Show maintenance items due in the next service interval (measured in mileage or days)

16. 16 Service Log Provides a detail view for one or more service logs for selected items, for a selected time period

17. 17 Inactivity Report Helps determine which beacons have not communicated with the system recently