1. 1 PWG Update Report By Ed Echols Of Oncor ERCOT PWG Chair Jim Lee of Direct Energy ERCOT PWG Vice Chair for COPS Meeting Sept 10, 2014

2. 2 LPGRR052 – Vote to Approve Relieves requirement for weather sensitivity check on Oil and Gas Flat CRs seeking to have the Oil & Gas Flat (OGFLT) Profile Segment assigned to one of their ESI IDs are required to provide ERCOT (ERCOTLoadProfilingDepartment@ercot.com) with documentation, either electronic (preferred) or hard copy, of the following: 1.Sales Tax Exemption Certificate (on file with the CR for the ESI ID) 2.Customer Certification to the CR that the Customer holds an official Railroad Commission of Texas Operator Number and uses electricity at the premises identified by the ESI ID for the purpose of exploring, producing or transporting oil and/or natural gas extracted from the earth. This Customer Certification must be signed by an official company representative and shall list the Railroad Commission of Texas Operator Number, the name of the entity holding the Operator Number, the ESI ID and the service address of the ESI ID. In addition, for NIDR ESI IDs to be assigned the Oil & Gas Flat (OGFLT) profile, ERCOT shall validate that they are not weather sensitive. ESI IDs with Meter Type = "IDR" are settled using interval data. {text enlarged for COPS mtg review} ERCOT shall submit validated requests to the TDSPs by the latter of five (5) business days of the receipt of the required documentation from a CR or the implementation date of the new BUSOGFLT Load Profile. ERCOT shall request (via e-mail or other mutually acceptable means) that the TDSP change the Profile Segment to an Oil & Gas Flat segment as specified on the Segment Assignment tab for the specified ESI ID, via the normal Texas SET process. The Oil & Gas Flat segment assignment shall not change simply due to a switch in CRs. Should a previously approved ESI ID become ineligible to be served under an Oil & Gas Flat segment, then ERCOT shall notify the appropriate TDSP to change the Profile Type to the current appropriate default Profile Type as if the ESI ID represented a new premise. TDSPs shall make reasonable effort to effect the change using the appropriate Texas SET process as soon as possible after notification. ERCOT shall notify the CR of record of any such changes to the Profile Type.

3. July 28: PWG consensus to request COPS approve LPGRR052 that removes the requirement for ERCOT staff to perform Weather Sensitivity test for ESIIDs settled on IDR data. The requested change is in the “Oil & Gas” tab of Appendix D - The Profile Decision Tree August 25: There is no impact from ERCOT for LPGRR052 as noted in the Impact Analysis Document posted 8/7/14 LPGRR053 was posted by ERCOT that will update the ZIP Codes to Weather Zone tab “ZipToZone” in Appendix D PWG Webex Meetings Summary

4. 4 2014 Annual Validation Schedule

5. 5 Residential Changes by TDSP

6. 6 Residential Changes by Weather Zone

7. 7 Next PWG meeting date; August 25, 2014 – 1:30 Webex only start time 248 Load Profiles 8 Weather Zones 31 Profile Types http://www.ercot.com/committees/board/tac/cops/pwg/