1. INSPECTION AND ACCEPTANCE CRITERIA

2. PRODUCT CONFORMANCE Dimensional conformance - within tolerances as defined on product drawing Dimensional conformance - within tolerances as defined on product drawing Structural conformance - defined by "Acceptance Criteria" Structural conformance - defined by "Acceptance Criteria"

3. PROCESS SPECIFICATION FOR VISUAL INSPECTION OF COMPOSITE PARTS link to document link to document link to document link to document

4. NONCONFORMING (REJECT) PART Quality Assurance applies acceptance criteria during in-process inspection, final inspection, and/or field inspection → part may be discrepant (defective) and rejected Quality Assurance applies acceptance criteria during in-process inspection, final inspection, and/or field inspection → part may be discrepant (defective) and rejected Discrepancy report (DR) written Discrepancy report (DR) written Requires disposition (in accordance with standard repair procedure or by MRB/Engineering) Requires disposition (in accordance with standard repair procedure or by MRB/Engineering) Part to be Part to be –reworked –repaired –scrapped