1. ResponseCard XR User Data Version 1.0 ®

2. Press the MENU button. ResponseCard XR

3. Current Channel (Leave on Channel 41) Battery Status (Two AAA batteries in back) Press YES to scroll down through Menu. Press NO to scroll up. Default Menu Screen

4. Navigating the Menu Scroll down to highlight Setup. (Press YES 4 times)

5. (If the screen goes blank, press any key except the MENU key) Setup Menu Press Enter to select Setup Mode.

6. Select User Data Press Enter to select User Data.

7. Edit User Data Press 2 to Edit your User Data.

8. Enter First Name Press 1 to Enter your First Name.

9. Selecting Letters Use the Left and Right Arrows to Select the First Letter of your First Name.

10. Selecting Letters For Example: Press the Left Arrow once to Highlight the Letter “L”.

11. Entering the First Letter Press SEL to Select the letter.

12. Ready For More Letters

13. Use the Left and Right arrows to continue spelling your name. Making Corrections Use the CLR button to Backspace and make corrections.

14. Do not press the MENU button as your changes will not be saved. Done Entering Name When you are done press the Enter button.

15. After pressing the Enter button, your screen will display the following. Cancel Send Data Press NO.

16. Enter Last Name Press 2 to Enter your Last Name. Follow the same procedure as your First Name.

17. Enter User ID Press 3 to enter a User “UVU” ID.

18. Back to User Data Press MENU to move back up the list of menus - in this screen, you can send the data you just entered by pressing 3 - otherwise press MENU again.

19. Select Other Options Use the arrow keys to select the other options.

20. Contrast will allow you to change the screen contrast. Battery will show the percentage of battery time left. Version shows the ResponseCard’s software version number. Other Setup Options Once you have selected an option, press the Enter button.

21. Setup is now complete. Setup Complete Press MENU until you return to the top level screen.