Presentation is loading. Please wait.

Presentation is loading. Please wait.

AIA Guidelines for Design and Construction of Hospital and Healthcare Facilities Presented By: Michael A. Rogers, PE

Similar presentations


Presentation on theme: "AIA Guidelines for Design and Construction of Hospital and Healthcare Facilities Presented By: Michael A. Rogers, PE"— Presentation transcript:

1 AIA Guidelines for Design and Construction of Hospital and Healthcare Facilities Presented By: Michael A. Rogers, PE MAR@PETERSON-AE.COM

2 It’s not a Code or Standard, why do I need to use it?

3 LAWYERS!

4 Facilities Covered Hospitals (chapter 7) Nursing Facilities (chapter 8) Outpatient Facilities (chapter 9) Rehabilitation Facilities (chapter 10) Psychiatric Hospitals (chapter 11)

5 When do I need to use it? Additions and Renovations Medical Equipment Addition or Replacement Roof Replacement Room Function Change Equipment Replacement

6 Provisions for Disaster Wind Loading / Earthquake Supplies Storage –Capacity of the following for 4 days of continuous operation : Food and drinking water Sterile supplies Pharmacy supplies Linens Water for sanitation

7 Energy Conservation Energy Conservation efforts shall not adversely affect patient health, safety, or comfort levels

8 Pollution Control Boilers Waste incinerators Sterilizers Storage tanks Storm water control Hazardous materials Medical waste

9 Construction Protection of patients Infection control Construction barriers Traffic flow Disruption of utility services Air flow control

10 Construction Exhaust

11 Outside Air Intake

12 HVAC Criteria

13 Redundant Steam Capacity Hospitals –Hot water for clinical, dietary and patient use –Steam for sterilization and dietary –Heating for operating, LDR, ICU, nursery, and general patient rooms

14 Redundant Steam Capacity Nursing Facilities –Hot water for clinical, dietary and resident use –Steam for dietary –Heating for general patient rooms (unless ASHRAE 99% design heating dry bulb is above 25 degrees F)

15 Redundant Steam Capacity Outpatient and Rehabilitation Facilities –Hot water for clinical, dietary and patient use –Steam for sterilization and dietary –Heating for operating, LDR, ICU, and general patient rooms (unless ASHRAE 99% design heating dry bulb is above 25 degrees F)

16 Ventilation Table 7.2 –Hospitals –Outpatient Facilities –Rehabilitation Facilities –Psychiatric Facilities Table 8.1 –Nursing Facilities

17 Table 7.2Ventilation

18 Table 8.1Ventilation

19 Air Change Comparison

20 Air Filtration Table 7.3 –Hospitals –Rehabilitation Facilities Table 8.2 –Nursing Facilities Table 9.1 –Outpatient Facilities Table 11.1 –Psychiatric Facilities

21 Table 7.3 Filtration

22 Plumbing Criteria

23 Medical Gases Table 7.5 –Hospitals –Rehabilitation Facilities –Psychiatric Facilities Table 9.2 –Outpatient Facilities

24 Table 7.5 Gas Outlets

25 Table 9.2 Gas Outlets

26 Electrical Criteria

27 Normal Electrical Install per NFPA 70 and 99 Lighting Levels per IES Reading light in all patient rooms Special Lighting for procedures and examination on separate circuit from general lighting

28 Emergency Electrical Install per NFPA 99, 101, and 110 Minimum 24 hours fuel storage.

29 giving shape to healthcare Questions ?


Download ppt "AIA Guidelines for Design and Construction of Hospital and Healthcare Facilities Presented By: Michael A. Rogers, PE"

Similar presentations


Ads by Google