1. H OW TO MAKE A TOMSON GUN By Rhys Leverington

2. S TEP -1-2-3-4-5-6-7 Cut the base out this is going to be the bit that holds the barrel. Then start to sand down the base to make it smooth and so it doesn't hurt anyone. make the holder at the end of the base of the gun Then sand down the gun holder Then get a metal barrel. Drill a hole in the bottom this is going to be the bit were you hold the magazine. Now were going to make magazine now cut out a piece of wood that is the size of a paint can & make slot bit so the magazine will fit in the hole.

3. S TEP -8 Start to paint the wood & metal. Spay the metal bar exhaust high tempter