2. 12 Steps 1. Wedge 2. Center 3. Drop the hole 4. Check the thickness of base leave ½ inch 5. Undercut base & pull up walls 6. Shape the pot 7. Trim the rim, round & smooth rim with paper towel 8. Remove water from inside of pot 9. Trim base 10. Cut off from bat 11. Write name on bat 12. Clean wheel, tools & turn off wheel.

3. Step 1 - Throwing http://www.youtube.com/user/claydemo#p/ a/u/0/0U8P80Ej29ghttp://www.youtube.com/user/claydemo#p/ a/u/0/0U8P80Ej29g http://www.youtube.com/user/claydemo#p/ a/u/1/atos1AB84pkhttp://www.youtube.com/user/claydemo#p/ a/u/1/atos1AB84pk

4. Trimming 1. Measure the thickness of the base & where foot should go 2. Place on wheel & center 3. Draw the foot 4. Trim the middle of foot 5. Trim the outside of foot 6. Smooth with rib & smooth needle tool hole 7. Write your name on the bottom 8. Sweep around wheel & make sure all tools & stilts are put away

5. Trimming http://www.youtube.com/watch?v=AAkrZ4 Aqb9o&feature=related&safety_mode=tru e&persist_safety_mode=1http://www.youtube.com/watch?v=AAkrZ4 Aqb9o&feature=related&safety_mode=tru e&persist_safety_mode=1

6. Pulling up the Walls http://www.youtube.com/watch?v=UNR7d DJs6K4&feature=related&safety_mode=tr ue&persist_safety_mode=1http://www.youtube.com/watch?v=UNR7d DJs6K4&feature=related&safety_mode=tr ue&persist_safety_mode=1