1. 2D Machine Control Systems
GCS500 for Graders

2. Station Content Guide the presenter of the sub-stations should
cover the following content at the different machines (sub-stations)
cover the points listed per machine (sub-station) and repeat constantly the points from the next slide
show the configuration which we have installed and on display so that the customer understands the parts of the system
show flexibility in terms of AccuGrade or GCS900 depending on what is installed on the machines (sub-stations)

3. Grade Control Systems GCS500
2D Machine Control Systems
Flexible and interchangeable from machine to machine and machine type to machine type
Supported from Control Box for 2D only or the CB430 (2D &3D) with one onboard software
Full support of 2D functionality also on the CB430
Multilingual support
Wide range of configurations in hard- and software
fully ubgradeable to 3D Machine Control Systems
Available for all machine manufacturer and also as factory fitted Trimble Ready pre-installation

4. Cross slope guidance

5. Cross slope guidance When using a cross slope guidance, the lightbars
only give guidance to one blade tip and only the lightbar corresponding to that is active. The lightbar corresponding to the unguided blade tip is blank. The horizontal lightbar is blank.

6. Trimble GCS500: 2D Grader– Cross-slope
CB420
CB430
LB400
AS400
RS400 or
Harness
Power Module
PM400
Valve Module
VM4X0

7. GCS500 for Graders - Benefits
Provides a simple solution to many sloping applications
Cross slope only
100% slope sensors
Full rotation capability
Upgradeable to elevation control
Easy to learn and use
Ideal for machines using multiple operators
No grade checking anymore
Reduction of costs
Reduction of downtime
Productivity enhancement
Flexibility to grow and get upgraded

8. Trimble GCS500 Applications
Designed for applications creating or maintaining slopes
Road maintenance
Sports fields
Embankments
Road ditches
Road construction
Highway construction