1. Computer Aided Engineering and Design Prof. Dr. Demir Bayka

2. TECHNICAL DRAWING Opening a drawing template and editing a sheet format Inserting standard views of a part model Adding model and reference annotations Adding another drawing sheet Inserting a named view Printing the drawing LEARNING OBJECTIVES

3. CLICK >

4. CLICK > PICK > CLICK >

5. In the Browse For Folder dialog box, navigate to AE103. CLICK >

6. CLICK > CLICK >

7. CLICK >

8. CLICK >

9. PICK >

11. CLICK >

12. PICK > NAME TEMPLATE AS > BROWSE TO >

13. CLICK > RIGHT CLICK ON DRAWING AND MENU WILL APPEAR

14. INFORMATION ABOUT THE DRAWING CAN NOW BE ADDED OR MODIFIED

15. LET US TAKE A CLOSER VIEW

16. LETS GET CLOSER YOU MAY WRITE YOUR NAME HERE. PASS OVER THE MIDDLE OF THE BOX AND CLICK WHEN YOU SEE “A”

17. SQUARE BRACKETS WILL APPEAR. CLICK IN THE BRACKETS AND EDIT

18. WRITE YOUR NAME CLICK >

19. CLICK AND EXIT THE EDIT MODE

20. CLICK > PICK > PICK >

21. CLICK > CLICK > AND REPLACE

22. EXIT THE DRAWING

23. CLICK > CLICK > CLICK >

24. PICK > PICK > CLICK >

25. CLICK > TO SELECT THE PART OR ASSEMBLY SOURCE FOR THE DRAWING

26. SELECT >

27. DRAG AND POSITION THE FRONT VIEW AS SHOWN BELOW

28. CLICK AND DROP THE FRONT VIEW

29. PLACE THE OTHER PROJECTED VIEWS BY MOVING THE MOUSE ON THE HORIZONTAL VERTICAL DIAGONAL DIRECTIONS CLICK >

31. CLICK AND DRAG TO NEW POITIONS

32. PICK THE FRONT VIEW SELECT HIDDEN LINES

33. PICK THE ISOMETRIC VIEW SELECT SHADED VIEW

34. SELECT ANNOTATIONS SELECT >

35. SELECT ENTIRE MODEL CHECK > CLICK >

36. GET CLOSER

37. ZOOM IN AND REPOSITION THE DIMENSIONS (CLICK WITH SHIFT TO CARRY DIMENSION)

38. CLICK > CLICK >

39. SELECT TOP LINE AND PICK THE MIDDLE

40. SELECT BOTTOM LINE AND PICK THE MIDDLE

41. CLICK >

42. ZOOM OUT AND REPOSITION

43. SELECT AND REPOSITION DELETE UNNECESSARY DIMENSIONS

45. CLICK AND DRAG THE AXIS

46. RIGHT CLICK AND SELECT EDIT SHEET FORMAT

48. SELECT PRINTER CLICK PRINT