1. 2000 Chevy S-10 Left Suicide Door Install Instructions 1.Remove seat (4 anchor bolts.) 2.Remove tracks from seat. To access the nut shown in pic 1, pry lip up as shown in pic 2. 3.Remove seat track assembly from Easy Reach unit and bolt to bottom of seat using supplied 5/16 – 18 x 1” flat heat screws with nylock nuts. 4.Place unit in vehicle taking care to keep wire connector from seat out from under unit. Note: It may be easier to start nut on front inboard corner before installing the other 3 (pic 5.) 5.Disengage rotate motor and swing unit out door and attach seat/tracks to unit. To close door, it may be necessary to heat lower panel in area shown in pic 4.

2. 1 2 To access the nut shown in pic 1, pry lip up as shown in pic 2.

3. Start this nut first 3

4. 4 5