1. Announcement r Project 3 out, due 3/10 r Homework 3 out last week m Due next Mon. 3/1

2. Review r Hierarchical Routing r The Internet (IP) Protocol m IPv4 addressing m Moving a datagram from source to destination Some slides are in courtesy of J. Kurose and K. Ross

3. Overview r The Internet (IP) Protocol m Datagram format m IP fragmentation m ICMP: Internet Control Message Protocol m NAT: Network Address Translation r Routing in the Internet m Intra-AS routing: RIP and OSPF m Inter-AS routing: BGP r Multicast Routing Some slides are in courtesy of J. Kurose and K. Ross

4. Getting a datagram from source to dest. IP datagram: 223.1.1.1 223.1.1.2 223.1.1.3 223.1.1.4 223.1.2.9 223.1.2.2 223.1.2.1 223.1.3.2 223.1.3.1 223.1.3.27 A B E misc fields source IP addr dest IP addr data r datagram remains unchanged, as it travels source to destination r addr fields of interest here Dest. Net. next router Nhops 223.1.1 1 223.1.2 223.1.1.4 2 223.1.3 223.1.1.4 2 forwarding table in A

5. Getting a datagram from source to dest. Starting at A, send IP datagram addressed to B: r look up net. address of B in forwarding table r find B is on same net. as A r link layer will send datagram directly to B inside link-layer frame m B and A are directly connected Dest. Net. next router Nhops 223.1.1 1 223.1.2 223.1.1.4 2 223.1.3 223.1.1.4 2 misc fields 223.1.1.1223.1.1.3 data 223.1.1.1 223.1.1.2 223.1.1.3 223.1.1.4 223.1.2.9 223.1.2.2 223.1.2.1 223.1.3.2 223.1.3.1 223.1.3.27 A B E forwarding table in A

6. Getting a datagram from source to dest. Dest. Net. next router Nhops 223.1.1 1 223.1.2 223.1.1.4 2 223.1.3 223.1.1.4 2 Starting at A, dest. E: r look up network address of E in forwarding table r E on different network m A, E not directly attached r routing table: next hop router to E is 223.1.1.4 r link layer sends datagram to router 223.1.1.4 inside link- layer frame r datagram arrives at 223.1.1.4 r continued….. misc fields 223.1.1.1223.1.2.3 data 223.1.1.1 223.1.1.2 223.1.1.3 223.1.1.4 223.1.2.9 223.1.2.2 223.1.2.1 223.1.3.2 223.1.3.1 223.1.3.27 A B E forwarding table in A

7. Getting a datagram from source to dest. Arriving at 223.1.4, destined for 223.1.2.2 r look up network address of E in router’s forwarding table r E on same network as router’s interface 223.1.2.9 m router, E directly attached r link layer sends datagram to 223.1.2.2 inside link-layer frame via interface 223.1.2.9 r datagram arrives at 223.1.2.2!!! (hooray!) misc fields 223.1.1.1223.1.2.3 data Dest. Net router Nhops interface 223.1.1 - 1 223.1.1.4 223.1.2 - 1 223.1.2.9 223.1.3 - 1 223.1.3.27 223.1.1.1 223.1.1.2 223.1.1.3 223.1.1.4 223.1.2.9 223.1.2.2 223.1.2.1 223.1.3.2 223.1.3.1 223.1.3.27 A B E forwarding table in router

8. IP datagram format ver length 32 bits data (variable length, typically a TCP or UDP segment) 16-bit identifier Internet checksum time to live 32 bit source IP address IP protocol version number header length (bytes) max number remaining hops (decremented at each router) for fragmentation/ reassembly total datagram length (bytes) upper layer protocol to deliver payload to head. len type of service “type” of data flgs fragment offset upper layer 32 bit destination IP address Options (if any) E.g. timestamp, record route taken, specify list of routers to visit. how much overhead with TCP? r 20 bytes of TCP r 20 bytes of IP r = 40 bytes + app layer overhead

9. IP Fragmentation & Reassembly r network links have MTU (max.transfer size) - largest possible link-level frame. m different link types, different MTUs r large IP datagram divided (“fragmented”) within net m one datagram becomes several datagrams m “reassembled” only at final destination m IP header bits used to identify, order related fragments fragmentation: in: one large datagram out: 3 smaller datagrams reassembly

10. IP Fragmentation and Reassembly ID =x offset =0 fragflag =0 length =4000 ID =x offset =0 fragflag =1 length =1500 ID =x offset =1480 fragflag =1 length =1500 ID =x offset =2960 fragflag =0 length =1040 One large datagram becomes several smaller datagrams Example r 4000 byte datagram r MTU = 1500 bytes

11. ICMP: Internet Control Message Protocol r used by hosts, routers, gateways to communication network-level information m error reporting: unreachable host, network, port, protocol m echo request/reply (used by ping) r network-layer “above” IP: m ICMP msgs carried in IP datagrams r Ping, traceroute uses ICMP

12. NAT: Network Address Translation 10.0.0.1 10.0.0.2 10.0.0.3 10.0.0.4 138.76.29.7 local network (e.g., home network) 10.0.0/24 rest of Internet Datagrams with source or destination in this network have 10.0.0/24 address for source, destination (as usual) All datagrams leaving local network have same single source NAT IP address: 138.76.29.7, different source port numbers

13. NAT: Network Address Translation r Motivation: local network uses just one IP address as far as outside word is concerned: m no need to be allocated range of addresses from ISP: - just one IP address is used for all devices m can change addresses of devices in local network without notifying outside world m can change ISP without changing addresses of devices in local network m devices inside local net not explicitly addressable, visible by outside world (a security plus).

14. NAT: Network Address Translation Implementation: NAT router must: m outgoing datagrams: replace (source IP address, port #) of every outgoing datagram to (NAT IP address, new port #)... remote clients/servers will respond using (NAT IP address, new port #) as destination addr. m remember (in NAT translation table) every (source IP address, port #) to (NAT IP address, new port #) translation pair m incoming datagrams: replace (NAT IP address, new port #) in dest fields of every incoming datagram with corresponding (source IP address, port #) stored in NAT table

15. NAT: Network Address Translation 10.0.0.1 10.0.0.2 10.0.0.3 S: 10.0.0.1, 3345 D: 128.119.40.186, 80 1 10.0.0.4 138.76.29.7 1: host 10.0.0.1 sends datagram to 128.119.40, 80 NAT translation table WAN side addr LAN side addr 138.76.29.7, 5001 10.0.0.1, 3345 …… S: 128.119.40.186, 80 D: 10.0.0.1, 3345 4 S: 138.76.29.7, 5001 D: 128.119.40.186, 80 2 2: NAT router changes datagram source addr from 10.0.0.1, 3345 to 138.76.29.7, 5001, updates table S: 128.119.40.186, 80 D: 138.76.29.7, 5001 3 3: Reply arrives dest. address: 138.76.29.7, 5001 4: NAT router changes datagram dest addr from 138.76.29.7, 5001 to 10.0.0.1, 3345

16. NAT: Network Address Translation r 16-bit port-number field: m 60,000 simultaneous connections with a single LAN-side address! r NAT is controversial: m routers should only process up to layer 3 m violates end-to-end argument NAT possibility must be taken into account by app designers, eg, P2P applications m address shortage should instead be solved by IPv6

17. Overview r The Internet (IP) Protocol m Datagram format m IP fragmentation m ICMP: Internet Control Message Protocol m NAT: Network Address Translation r Routing in the Internet m Intra-AS routing: RIP and OSPF m Inter-AS routing: BGP r Multicast Routing Some slides are in courtesy of J. Kurose and K. Ross

18. Routing in the Internet r The Global Internet consists of Autonomous Systems (AS) interconnected with each other: m Stub AS: small corporation: one connection to other AS’s m Multihomed AS: large corporation (no transit): multiple connections to other AS’s m Transit AS: provider, hooking many AS’s together r Two-level routing: m Intra-AS: administrator responsible for choice of routing algorithm within network m Inter-AS: unique standard for inter-AS routing: BGP

19. Internet AS Hierarchy Intra-AS border (exterior gateway) routers Inter-AS interior (gateway) routers

20. Intra-AS Routing r Also known as Interior Gateway Protocols (IGP) r Most common Intra-AS routing protocols: m RIP: Routing Information Protocol m OSPF: Open Shortest Path First m IGRP: Interior Gateway Routing Protocol (Cisco proprietary)

21. OSPF (Open Shortest Path First) r “open”: publicly available r Uses Link State algorithm m LS packet dissemination m Topology map at each node m Route computation using Dijkstra’s algorithm r OSPF advertisement carries one entry per neighbor router r Advertisements disseminated to entire AS (via flooding) m Carried in OSPF messages directly over IP (rather than TCP or UDP

22. OSPF “advanced” features (not in RIP) r Security: all OSPF messages authenticated (to prevent malicious intrusion) r For each link, multiple cost metrics for different TOS (e.g., satellite link cost set “low” for best effort; high for real time) r Integrated uni- and multicast support: m Multicast OSPF (MOSPF) uses same topology data base as OSPF r Hierarchical OSPF in large domains.

23. Hierarchical OSPF

24. r Two-level hierarchy: local area, backbone. m Link-state advertisements only in area m each nodes has detailed area topology; only know direction (shortest path) to nets in other areas. r Area border routers: “summarize” distances to nets in own area, advertise to other Area Border routers. r Backbone routers: run OSPF routing limited to backbone. r Boundary routers: connect to other AS’s.

25. Inter-AS routing in the Internet: BGP

26. Internet inter-AS routing: BGP r BGP (Border Gateway Protocol): the de facto standard r Path Vector protocol: m similar to Distance Vector protocol m each Border Gateway broadcast to neighbors (peers) entire path (i.e., sequence of AS’s) to destination m BGP routes to networks (ASs), not individual hosts m E.g., Gateway X may send its path to dest. Z: Path (X,Z) = X,Y1,Y2,Y3,…,Z

27. Internet inter-AS routing: BGP Suppose: gateway X send its path to peer gateway W r W may or may not select path offered by X m cost, policy (don’t route via competitors AS), loop prevention reasons. r If W selects path advertised by X, then: Path (W,Z) = w, Path (X,Z) r Note: X can control incoming traffic by controlling it route advertisements to peers: m e.g., don’t want to route traffic to Z -> don’t advertise any routes to Z

28. BGP: controlling who routes to you r A,B,C are provider networks r X,W,Y are customer (of provider networks) r X is dual-homed: attached to two networks m X does not want to route from B via X to C m.. so X will not advertise to B a route to C

29. BGP: controlling who routes to you r A advertises to B the path AW r B advertises to X the path BAW r Should B advertise to C the path BAW? m No way! B gets no “revenue” for routing CBAW since neither W nor C are B’s customers m B wants to force C to route to w via A m B wants to route only to/from its customers!

30. BGP operation Q: What does a BGP router do? r Receiving and filtering route advertisements from directly attached neighbor(s). r Route selection. m To route to destination X, which path )of several advertised) will be taken? r Sending route advertisements to neighbors.

31. Why different Intra- and Inter-AS routing ? Policy: r Inter-AS: admin wants control over how its traffic routed, who routes through its net. r Intra-AS: single admin, so no policy decisions needed Scale: r hierarchical routing saves table size, reduced update traffic Performance: r Intra-AS: can focus on performance r Inter-AS: policy may dominate over performance

32. Overview r The Internet (IP) Protocol m Datagram format m IP fragmentation m ICMP: Internet Control Message Protocol m NAT: Network Address Translation r Routing in the Internet m Intra-AS routing: RIP and OSPF m Inter-AS routing: BGP r Multicast Routing Some slides are in courtesy of J. Kurose and K. Ross

33. Multicast: one sender to many receivers r Multicast: act of sending datagram to multiple receivers with single “transmit” operation m analogy: one teacher to many students r Question: how to achieve multicast Multicast via unicast r source sends N unicast datagrams, one addressed to each of N receivers multicast receiver (red) not a multicast receiver (red) routers forward unicast datagrams

34. Multicast: one sender to many receivers r Multicast: act of sending datagram to multiple receivers with single “transmit” operation m analogy: one teacher to many students r Question: how to achieve multicast Network multicast r Router actively participate in multicast, making copies of packets as needed and forwarding towards multicast receivers Multicast routers (red) duplicate and forward multicast datagrams

35. Multicast: one sender to many receivers r Multicast: act of sending datagram to multiple receivers with single “transmit” operation m analogy: one teacher to many students r Question: how to achieve multicast Application-layer multicast r end systems involved in multicast copy and forward unicast datagrams among themselves

36. Internet Multicast Service Model multicast group concept: use of indirection m hosts addresses IP datagram to multicast group m routers forward multicast datagrams to hosts that have “joined” that multicast group 128.119.40.186 128.59.16.12 128.34.108.63 128.34.108.60 multicast group 226.17.30.197

37. Multicast groups  class D Internet addresses reserved for multicast:  host group semantics: oanyone can “join” (receive) multicast group oanyone can send to multicast group ono network-layer identification to hosts of members  needed: infrastructure to deliver mcast-addressed datagrams to all hosts that have joined that multicast group

38. Joining a mcast group: two-step process r local: host informs local mcast router of desire to join group: IGMP (Internet Group Management Protocol) r wide area: local router interacts with other routers to receive mcast datagram flow m many protocols (e.g., DVMRP, MOSPF, PIM) IGMP wide-area multicast routing

39. IGMP: Internet Group Management Protocol r host: sends IGMP report when application joins mcast group m IP_ADD_MEMBERSHIP socket option m host need not explicitly “unjoin” group when leaving r router: sends IGMP query at regular intervals m host belonging to a mcast group must reply to query query report

40. Multicast Routing: Problem Statement r Goal: find a tree (or trees) connecting routers having local mcast group members m tree: not all paths between routers used m source-based: different tree from each sender to rcvrs m shared-tree: same tree used by all group members Shared tree Source-based trees

41. Approaches for building mcast trees Approaches: r source-based tree: one tree per source m shortest path trees m reverse path forwarding r group-shared tree: group uses one tree m minimal spanning (Steiner) m center-based trees …we first look at basic approaches, then specific protocols adopting these approaches

42. Shortest Path Tree r mcast forwarding tree: tree of shortest path routes from source to all receivers m Dijkstra’s algorithm R1 R2 R3 R4 R5 R6 R7 2 1 6 3 4 5 i router with attached group member router with no attached group member link used for forwarding, i indicates order link added by algorithm LEGEND S: source

43. Reverse Path Forwarding if (mcast datagram received on incoming link on shortest path back to center) then flood datagram onto all outgoing links else ignore datagram  rely on router’s knowledge of unicast shortest path from it to sender  each router has simple forwarding behavior:

44. Reverse Path Forwarding: example result is a source-specific reverse SPT –may be a bad choice with asymmetric links R1 R2 R3 R4 R5 R6 R7 router with attached group member router with no attached group member datagram will be forwarded LEGEND S: source datagram will not be forwarded

45. Reverse Path Forwarding: pruning r forwarding tree contains subtrees with no mcast group members m no need to forward datagrams down subtree m “prune” msgs sent upstream by router with no downstream group members R1 R2 R3 R4 R5 R6 R7 router with attached group member router with no attached group member prune message LEGEND S: source links with multicast forwarding P P P

46. Shared-Tree: Steiner Tree r Steiner Tree: minimum cost tree connecting all routers with attached group members r problem is NP-complete r excellent heuristics exists r not used in practice: m computational complexity m information about entire network needed m monolithic: rerun whenever a router needs to join/leave

47. Center-based trees r single delivery tree shared by all r one router identified as “center” of tree r to join: m edge router sends unicast join-msg addressed to center router m join-msg “processed” by intermediate routers and forwarded towards center m join-msg either hits existing tree branch for this center, or arrives at center m path taken by join-msg becomes new branch of tree for this router

48. Center-based trees: an example Suppose R6 chosen as center: R1 R2 R3 R4 R5 R6 R7 router with attached group member router with no attached group member path order in which join messages generated LEGEND 2 1 3 1

49. Chapter 4 roadmap 4.1 Introduction and Network Service Models 4.2 Routing Principles 4.3 Hierarchical Routing 4.4 The Internet (IP) Protocol 4.5 Routing in the Internet 4.6 What’s Inside a Router? 4.7 IPv6 4.8 Multicast Routing 4.9 Mobility

50. What is mobility? r spectrum of mobility, from the network perspective: no mobility high mobility mobile user, using same access point mobile user, passing through multiple access point while maintaining ongoing connections ( like cell phone) mobile user, connecting/ disconnecting from network using DHCP.

51. Mobility: Vocabulary home network: permanent “home” of mobile (e.g., 128.119.40/24) Permanent address: address in home network, can always be used to reach mobile e.g., 128.119.40.186 home agent: entity that will perform mobility functions on behalf of mobile, when mobile is remote wide area network correspondent

52. Mobility: more vocabulary Care-of-address: address in visited network. (e.g., 79,129.13.2) wide area network visited network: network in which mobile currently resides (e.g., 79.129.13/24) Permanent address: remains constant ( e.g., 128.119.40.186) home agent: entity in visited network that performs mobility functions on behalf of mobile. correspondent: wants to communicate with mobile

53. How do you contact a mobile friend: r search all phone books? r call her parents? r expect her to let you know where he/she is? I wonder where Alice moved to? Consider friend frequently changing addresses, how do you find her?

54. Mobility: approaches r Let routing handle it: routers advertise permanent address of mobile-nodes-in-residence via usual routing table exchange. m routing tables indicate where each mobile located m no changes to end-systems r Let end-systems handle it: m indirect routing: communication from correspondent to mobile goes through home agent, then forwarded to remote m direct routing: correspondent gets foreign address of mobile, sends directly to mobile

55. Mobility: approaches r Let routing handle it: routers advertise permanent address of mobile-nodes-in-residence via usual routing table exchange. m routing tables indicate where each mobile located m no changes to end-systems r let end-systems handle it: m indirect routing: communication from correspondent to mobile goes through home agent, then forwarded to remote m direct routing: correspondent gets foreign address of mobile, sends directly to mobile not scalable to millions of mobiles

56. Mobility: registration End result: r Foreign agent knows about mobile r Home agent knows location of mobile wide area network home network visited network 1 mobile contacts foreign agent on entering visited network 2 foreign agent contacts home agent home: “this mobile is resident in my network”

57. Mobility via Indirect Routing wide area network home network visited network 3 2 4 1 correspondent addresses packets using home address of mobile home agent intercepts packets, forwards to foreign agent foreign agent receives packets, forwards to mobile mobile replies directly to correspondent

58. Indirect Routing: comments r Mobile uses two addresses: m permanent address: used by correspondent (hence mobile location is transparent to correspondent) m care-of-address: used by home agent to forward datagrams to mobile r foreign agent functions may be done by mobile itself r triangle routing: correspondent-home-network- mobile m inefficient when correspondent, mobile are in same network

59. Forwarding datagrams to remote mobile Permanent address: 128.119.40.186 Care-of address: 79.129.13.2 dest: 128.119.40.186 packet sent by correspondent dest: 79.129.13.2 dest: 128.119.40.186 packet sent by home agent to foreign agent: a packet within a packet dest: 128.119.40.186 foreign-agent-to-mobile packet

60. Indirect Routing: moving between networks r suppose mobile user moves to another network m registers with new foreign agent m new foreign agent registers with home agent m home agent update care-of-address for mobile m packets continue to be forwarded to mobile (but with new care-of-address) r Mobility, changing foreign networks transparent: on going connections can be maintained!

61. Mobility via Direct Routing wide area network home network visited network 4 2 4 1 correspondent requests, receives foreign address of mobile correspondent forwards to foreign agent foreign agent receives packets, forwards to mobile mobile replies directly to correspondent 3

62. Mobility via Direct Routing: comments r overcome triangle routing problem r non-transparent to correspondent: correspondent must get care-of-address from home agent m What happens if mobile changes networks?

63. Mobile IP r RFC 3220 r has many features we’ve seen: m home agents, foreign agents, foreign-agent registration, care-of-addresses, encapsulation (packet-within-a-packet) r three components to standard: m agent discovery m registration with home agent m indirect routing of datagrams

64. Mobile IP: agent discovery r agent advertisement: foreign/home agents advertise service by broadcasting ICMP messages (typefield = 9) R bit: registration required H,F bits: home and/or foreign agent

65. Mobile IP: registration example

66. Network Layer: summary Next stop: the Data link layer! What we’ve covered: r network layer services r routing principles: link state and distance vector r hierarchical routing r IP r Internet routing protocols RIP, OSPF, BGP r what’s inside a router? r IPv6 r mobility