1. PPE Personal Protective Equipment

2. Purpose of PPE n To shield or isolate the individual from chemical, physical, or biological hazards that may be encountered. –Acute injuries –Chronic Illnesses –Comfort

3. When To Use PPE n Engineering Controls n Administrative Controls n PPE

4. Levels of Protection Level A Level B Level C Level D

5. Upgrading and Downgrading n Hazard Assessment is crucial and required under OSHA’s PPE standard. n A Hazard Assessment is crucial prior to and during the Emergency Response. n Health is the overriding reason for Upgrade or Downgrade- NEVER MONEY!

6. WHAT PPE DO WE USE? n Penetration n Degradation n Breakthrough Time n Permeation Rate

7. We Need to Know the Following Before we can Determine What PPE to Wear. n What form is the contaminant? n How toxic is the substance? n What is the individual’s sensitivity to the hazard? n Can you taste or smell the contaminant so you can tell if there has been a breakthrough? n What is the concentration of the substance? n How long will the worker be exposed to the substance?

8. Risk Assessment 1.What are the harmful effects of the materials or chemicals? 2.What form is it in? 3.What other dangers are involved? 4.How do the conditions of work allow the material to come in contact with the workers?

9. Head Protection n Hard Hats Checked regularly No cracks, broken suspension or flaws. Suspension is very important!

10. Face Protection n Eye Protection –Glasses side shields Z-87 –Goggles dusty, chemicals n Face shield

13. Safety Foot Wear n Steel Toe n Rubber or Chemical

14. Hand Protection n Cloth/Leather n Chemical

15. How to Remove Gloves

19. Clothing Common materials used. Seam Construction Other Types

20. Respirators n Escape –1 use or 1 year n Filtering –Fit test –Fit check n Supplied Air –SCBA

21. The Eyes Have It Gold Silver BronzeHear Ye A Breath of Fresh Air PPE for Me Gold Silver Bronze Gold Silver Bronze Gold Silver Bronze

22. These are worn when working in dusty areas or when working with chemicals above the PEL Return

23. Three reasons why the use of PPE is necessary. Return

24. These must be permanently affixed to the Z-87 frame to be considered OSHA approved. Return

25. What are the first two steps of the OSHA hierarchy of PPE use? Return

26. The level of protection where the SCBA is worn on the outside of the suit. Return

27. When upgrading or downgrading PPE levels this should never be a consideration. Return

28. When a chemical flows through zippers, stitches, seams or pores of chemical protective clothing,. Return

29. Your face must be smooth as a baby’s bottom to ride in one of these Return

30. What must be done prior to choosing the PPE you wear. Return

31. A type of seam that is normally used in Level A suits, it is formed by using heat and melts the fabric together without sewing. Return

32. The most underused piece of PPE. Return

33. Level of Protection When Chemicals are Unknown. Return