1. Experts in Chem-Feed and Water Treatment beta Metering Pumps 1

2. Experts in Chem-Feed and Water Treatment 2  Microprocessor-based and available in two drive (solenoid) sizes: beta/4 and beta/5.  Maximum capacity for the beta/4 is 5.3 gph; the beta/5 is 8.4 gph.  Features include:  Continuous stroke length adjustment  Stroke frequency adjustment  LED fault indicators  Convex diaphragm  Auto-degassing liquid end  External access to relay outputs

3. Experts in Chem-Feed and Water Treatment beta Features 3 Stroke Length Adjustment Knob LED Fault Indicators Level Switch Port Multifunction Switch Power Input (detachable) External Control Port

4. Experts in Chem-Feed and Water Treatment Stroke Length Adjustment  Stroke length (fluid displacement per stroke) is manually adjustable using the stroke length knob.  The scale is from 0% to 100% of the maximum stroke length at a ratio of 10:1. 4

5. Experts in Chem-Feed and Water Treatment Multifunction Switch  The multifunction switch has settings for manual stroke frequency, external pulse contact, stop and test modes.  Stroke frequency control is adjustable in 10% increments from 10 to 100%.  External pulse is a voltage-free on/off contact. The Stop setting will stop the pumping. The test setting is used for priming the pump. It overrides any of the pump settings and strokes at 100% of the pump frequency 5

6. Experts in Chem-Feed and Water Treatment LED Indicators  The 3 LED’s indicate the pump’s operating status:  The green LED flashes with each pump stroke indicating normal pump operation.  The yellow LED lights when the liquid level drops below the first float switch triggering level.  The red LED lights in the presence of faults such as low tank level (with option float switch) 6

7. Experts in Chem-Feed and Water Treatment 7 Cable Signals A 5-wire control cable is used for external control. Close brown and black to run, or open them to pause the pump. Use brown and black together for remote pause or pulse signals. Pause: brown External (+): white Not configured: blue Reference potential: black Auxiliary frequency: gray

8. Experts in Chem-Feed and Water Treatment Relay Outputs  An external panel in the base of the pump enables optional relays to be installed on-site.  The Relay Output can provide fault annunciation, pace a slave pump or allow stroke counting on an external counter.  The SPDT relay is available for collective fault indication as either pulling in or dropping out (which also alarms on loss of power). 8

9. Experts in Chem-Feed and Water Treatment Liquid End Options  Liquid end materials include:  Polypropylene (Viton or EPDM seals)  PVC (Viton or EPDM seals)  Acrylic (Viton or EPDM seals)  Carbon-filled Teflon-PTFE (PTFE seals)  316 Stainless Steel (PTFE seals)  Liquid ends are available with or without a bleed valve. An auto- degassing liquid end is also available for fluids that outgas.  Some liquid ends are interchangeable between the beta/4 and beta/5 versions. 9

10. Experts in Chem-Feed and Water Treatment 10 Liquid End w/o Bleed Valve Discharge Valve Suction Valve

11. Experts in Chem-Feed and Water Treatment 11 Liquid End with Bleed Valve Discharge Valve Bleed Valve Suction Valve Acrylic liquid end shown. Polypropylene and PVC bleed valves are on the side of the liquid end.

12. Experts in Chem-Feed and Water Treatment 12 Auto-degassing Liquid End Auto-degassing Port (discharges back to tank) Discharge Valve Suction Valve The auto-degassing liquid ends for beta pumps automatically evacuate gas bubbles entrained in the solution to prevent the pump from becoming airlocked. The pump can self- prime against system pressure so it does not lose prime.

13. Experts in Chem-Feed and Water Treatment 13 beta/4 Capacities VersionPSIGGPHml/strkStrk/minConnectorsSuction Lift (ft) 10001450.190.071801/4 x 3/1619.7 16012530.290.101801/4 x 3/1619.7 16022530.550.191801/4 x 3/1619.7 10051451.10.411801/2 x 3/816.4 07081011.90.661801/2 x 3/8 13.1 0413583.21.141801/2 x 3/8 9.8 0220295.01.761801/2 x 3/8 6.5 Auto-degassing Liquid Ends VersionPSIGGPHml/strkStrk/minConnectorsSuction Lift (ft) 16012530.160.061801/4 x 3/165.9 16022530.370.131801/4 x 3/166.9 10051450.950.331801/2 x 3/88.8 07081011.760.611801/2 x 3/8 6.5 0413582.81.001801/2 x 3/8 8.2 0220294.31.501801/2 x 3/86.5

14. Experts in Chem-Feed and Water Treatment 14 beta/5 Capacities VersionPSIGGPHml/strkStrk/minConnectorsSuction Lift (ft) 16052531.10.381801/2 x 3/813.1 10081451.80.631801/2 x 3/89.8 07131012.91.021801/2 x 3/8 9.8 0420584.51.581801/2 x 3/8 9.8 0232298.42.961801/2 x 3/8 6.5 Auto-degassing Liquid Ends VersionPSIGGPHml/strkStrk/minConnectorsSuction Lift (ft) 16052530.870.311801/2 x 3/89.8 10081451.660.581801/2 x 3/89.8 07131012.770.971801/2 x 3/88.2 0420584.121.441801/2 x 3/8 8.2

15. Experts in Chem-Feed and Water Treatment Features  High Viscosity Liquid Ends  PVDF  With valve springs  Viscosity up to 3000 Centipoises  Types 1005/1605, 07081008, 0413/0713 and 0220/0420  Low Voltage Version  12-24 VDC and 24 V AC/DC  Available for all pump types  Auto-degassing Liquid Ends 15