1. Chapter 14 Other Wired Networks 14.# 1
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
14.# 1

2. Chapter 14: Outline 14.1 TELEPHONE NETWORKS 14.3 SONET 14.4 ATM 14.#

3. TELEPHONE NETWORK
The telephone network had its beginnings in the late 1800s. The entire network was originally an analog system using analog signals to transmit voice.
14.3
14.#
14.#

4. During the 1980s, the phone network carries data and voice.
TELEPHONE NETWORK
During the 1980s, the phone network carries data and voice.
The phone network is now both digital and analog.
14.4
14.#
14.#

5. Major Components
The telephone network is made of three major components:
local loops,
trunks, and
switching offices.
14.5
14.#
14.#

6. Major Components
The telephone network has several levels of switching offices such as
end offices,
tandem offices, and
regional offices.
14.6
14.#
14.#

7. Figure 14. 1: A telephone system
14.7
14.#
14.#

8. LATAs
Local-Access Transport Areas.
14.8
14.#
14.#

9. LATAs
After the divestiture of 1984 (see Appendix H), the United States was divided into more than 200 local-access transport areas (LATAs). The number of LATAs has increased since then.
14.9
14.#
14.#

10. Figure 14. 2: Switching offices in a LATA
14.10
14.#
14.#

11. Figure 14. 3: Points of presence (POPs)
14.11
14.#
14.#

12. Figure 14. 4: Data transfer and signaling network
14.12
14.#
14.#

13. Figure 14. 5: Layers in Signaling-System-7
14.13
14.#
14.#

14. 14.#

15. transport network to carry loads from other WANs.
SONET
In this section, we introduce a wide area network (WAN), SONET, that is used as a
transport network to carry loads from other WANs.
14.15
14.#
14.#

16. Architecture
Let us first introduce the architecture of a SONET system: signals, devices, and connections..
14.16
14.#
14.#

17. STS-n Synchronous Transport Signals
In Europe it is called a synchronous transport module (STM)
14.#

18. OC-n
Optical Carrier
14.#

19. Table 14.1: SONET rates
14.19
14.# 19

20. SONET Layers
The SONET standard includes four functional layers: the photonic, the section, the line, and the path layer. They correspond to both the physical and the data-link layers (see Figure 14.15). The headers added to the frame at the various layers are discussed later in this chapter.
14.20
14.#
14.#

21. SONET Layers
The SONET standard includes four functional layers: the photonic, the section, the line, and the path layer. They correspond to both the physical and the data-link layers (see Figure 14.15). The headers added to the frame at the various layers are discussed later in this chapter.
14.21
14.#
14.#

22. Figure 14.14: A simple network using SONET equipment
14.22
14.#
14.#

23. Figure 14.15: SONET layers compared with OSI or the Internet layers
14.23
14.#
14.#

24. Figure 14.16: Device-Layer relationship in SONET
14.24
14.#
14.#

25. Figure 14.14: A simple network using SONET equipment
14.25
14.#
14.#

26. SONET Frames
Each synchronous transfer signal STS-n is composed of 8000 frames.
14.26
14.#
14.#

27. SONET Frames
Each synchronous transfer signal STS-n is composed of 8000 frames.
Each frame is a two-dimensional matrix of bytes with 9 rows by 90 × n columns.
14.27
14.#
14.#

28. SONET Frames
For example, an STS-1 frame is 9 rows by 90 columns (810 bytes), and an STS-3 is 9 rows by 270 columns (2430 bytes). Figure shows the general format of an STS-1 and an STS-n.
14.28
14.#
14.#

29. Figure 14.17: An STS-1 and an STS-n frame
14.29
14.#
14.#

30. Figure 14.18: STS-1 frames in transition
14.30
14.#
14.#

31. Architecture
Let us first introduce the architecture of a SONET system: signals, devices, and connections..
14.31
14.#
14.#

32. Example 14.1 Find the data rate of an STS-1 signal. Solution
STS-1, like other STS signals, sends 8000 frames per second. Each STS-1 frame is made of 9 by (1 × 90) bytes. Each byte is made of 8 bits. The data rate is
14.32
14.# 32

33. Example 14.2 Find the data rate of an STS-3 signal. Solution
STS-3, like other STS signals, sends 8000 frames per second. Each STS-3 frame is made of 9 by (3 × 90) bytes. Each byte is made of 8 bits. The data rate is
14.33
14.# 33

34. Example 14.3
What is the duration of an STS-1 frame? STS-3 frame? STS-n frame?
Solution
In SONET, 8000 frames are sent per second. This means that the duration of an STS-1, STS-3, or STS-n frame is the same and equal to 1/8000 s, or 125 μs.
14.34
14.# 34

35. SPE
Synchronous Payload Envelope
14.#

36. Figure 14.19: STS-1 frame overheads
14.36
14.#
14.#

37. Figure 14.14: A simple network using SONET equipment
14.37
14.#
14.#

38. Figure 14.20: STS-1 frame: section overheads
14.38
14.#
14.#

39. Figure 14.21: STS-1 frame: line overhead
14.39
14.#
14.#

40. Figure 14.22: STS-1 frame path overhead
14.40
14.#
14.#

41. Table 14.2: SONETs overhead
14.41
14.# 41

42. Example 14.4
What is the user data rate of an STS-1 frame (without considering the overheads)?
Solution
The user data part of an STS-1 frame is made of 9 rows and 86 columns. So we have
14.42
14.# 42

43. Figure 14.23: Offsetting of SPE related to frame boundary
14.43
14.#
14.#

44. Figure 14.24: The use of H1 and H2 to show the start of SPE
14.44
14.#
14.#

45. STS Multiplexing
In SONET, frames of lower rate can be synchronously time-division multiplexed into a higher-rate frame.
14.45
14.#
14.#

46. STS Multiplexing
For example, three STS-1 signals (channels) can be combined into one STS-3 signal (channel), four STS-3s can be multiplexed into one STS-12, and so on.
14.46
14.#
14.#

47. Figure 14.25: STS multiplexing/demultiplexing
14.47
14.#
14.#

48. Figure 14.26: Byte interleaving (bytes remain in the same row)
14.48
14.#
14.#

49. Figure 14.27: An STS-3 frame
14.49
14.#
14.#

50. Figure 14.28: A concatenated STS-3c signal
14.50
14.#
14.#

51. Figure 14.29: Dropping and adding frames in an add/drop multiplexer
14.51
14.#
14.#

52. SONET Networks
Using SONET equipment, we can create a SONET network that can be used as a high-speed backbone carrying loads from other networks such as ATM (Section 14.4) or IP (Chapter 19).
14.52
14.#
14.#

53. SONET Networks
SONET networks are divided into three categories:
linear,
ring, and
mesh networks
14.53
14.#
14.#

54. Figure 14.30: Taxonomy of SONET networks
14.54
14.#
14.#

55. Figure 14.34: A unidirectional path switching ring
14.55
14.#
14.#

56. Figure 14.35: A bidirectional switching ring
14.56
14.#
14.#

57. Figure 14. 36: A combination of rings
14.57
14.#
14.#

58. Figure 14.37: A mesh SONET network
14.58
14.#
14.#

59. Virtual Tributaries
SONET is designed to carry broadband payloads. To make SONET backward-compatible with the current hierarchy, its frame design includes a system of virtual tributaries (VTs) (see Figure 14.38).
14.59
14.#
14.#

60. Virtual Tributaries
A virtual tributary is a partial payload that can be inserted into an STS-1 and combined with other partial payloads to fill out the frame. Instead of using all 86 payload columns of an STS-1 frame for data from one source, we can subdivide the SPE and call each component a VT.
14.60
14.#
14.#

61. Figure 14.38: Virtual tributaries
14.61
14.#
14.#

62. Figure 14.39: Virtual tributary types
14.62
14.#
14.#

63. Asynchronous Transfer Mode (ATM)
The combination of ATM and SONET will allow high-speed interconnection of all the world’s networks.
14.63
14.#
14.#

64. Problems
Before we discuss the solutions to these design requirements, it is useful to examine some of the problems associated with existing systems.
14.64
14.#
14.#

65. Figure 14.40: Multiplexing using different frame size
14.65
14.#
14.#

66. Figure 14.41: Multiplexing using cells
14.66
14.#
14.#

67. Figure 14.42: ATM multiplexing
14.67
14.#
14.#

68. Architecture
ATM is a cell-switched network. The user access devices, called the endpoints, are connected through a user-to-network interface (UNI) to the switches inside the network. The switches are connected through network-to-network interfaces (NNIs). Figure shows an example of an ATM network.
14.68
14.#
14.#

69. Figure 14.43: Architecture of an ATM network
14.69
14.#
14.#

70. Figure 14.45: Virtual connection identifiers in UNIs and NNIs
14.70
14.#
14.#

71. Figure 14.46: An ATM cell
14.71
14.#
14.#

72. Figure 14.47: Routing with a switch
14.72
14.#
14.#

73. Figure 14.49: AAL5
14.73
14.#
14.#