1. IBM System/360 Matt Babaian Nathan Clark Paul DesRoches Jefferson Miner Tara Sodano

2. The IBM System/360 The system’s architecture is still the basis for almost half the current mainframe computers worldwide. The creation of the 360 line was an attempt to create a fully compatible line of processors capable of handling all jobs for all types of customers. Five processing units spanned the main part of the product line. –System/360 Models 30, 40, 50, 65, and 75. –They were all fully compatible which was an important part of their success. There would end up being 18 proposed models with 14 of them actually being produced and shipped.

3. Models: 30 40 50 60 62 70 92 91 20 65 75 95 44 67 25 85 195 22

4. Memory and Registers IBM realized that one or more accumulators would be the only realistic starting point for high-speed machines. They also considered using multiple accumulators without increasing the instruction format by organizing the registers into a stack in which only the top register would ever be involved in arithmetic. –whenever a load instruction brought an operand from memory to the top of the stack, operands already there would be “pushed down” one level. A store instruction would move the top number to memory and “push up” those at the second and lower levels.

5. Registers (con’t) 16 32-bit general registers 4 64-bit floating-point registers three ALUs –Fixed-point –decimal –Floating-Point Special Purpose Registers –Address register - the next memory location to be accessed –Instruction Register - the next instructionto be executed –Program Status Word - program counter –Data Register - data coming in from or going to memory, data from inside the instruction Special Data Types –packed decimal –unpacked decimal –fixed point –floating point

6. Addressing Scheme The 360 used position independent (the register plus either an offset or an index) addressing modes. On of the strengths of the 360’s addressing was its compatibility. –The 360 was designed with the current incompatibility of other IBM computers at that time. Programs designed for the IBM 7094 or the IBM 1401, two machines incompliant with each other, could run on the 360. It was a pioneer in this sense, but IBM’s decision to use 24 bits instead of 32 for addressing, proved in the long run to be unsatisfactory.

7. Memory Map Dr. Abzug “The memory map is horrible” Memory Map did not provide the user with adequate means for saving data IBM used the cheapest way to create their memory map

8. Instruction Set Five types of instruction formats RR - Register to Register RS - Register to Storage RX - Register to Indexed Storage SI - Storage Immediate SS - Storage to Storage

9. Instruction Set Instructions were broken up by these five instruction formats Within the formats, instructions are grouped by type of instruction Examples

10. 60 nanoseconds Circuitry and hardware advances Advanced implementation techniques –pipelining –multiple functional units –interleaved memory with numerous buffers

11. Pipelining the parallel execution of different instructions two independent functional units –fixed-point arithmetic –floating point arithmetic instruction-processing unit –generate the operand address –move the instruction to the decode area –decode the instruction –issue the instruction

12. Speed up instruction fetches 16 low order interleaved memory modules CPU had (64-bit) instruction fetch buffer two double-word branch target buffers

13. Conditional Branch Instructions CPU carry out instructions store them marked as conditional perform a test this provided execution parallelism

14. Instruction Unit determined each operand address generated memory instructions storage module –store instruction address queue in three store address buffers –data store data buffer appropriate operation buffer

15. Speed A few interesting factors… MST(Monolithic Systems Technology) Circuits Number of Machine Cycles Innovative Cache (Local Storage)

16. Speed - MST Circuits Significantly faster than predecessor SLT Joe Logue - monolithic circuit development FET(Field Effect Transistors) MOS(Metal Oxide Silicon) Structure

17. Speed - Machine Cycles Reduce number with pipeline provisions n f-p additions perform in n + 1 cycles One f-p addition every three machine cycles Add & multiply units perform independently Addition and multiplication can be executed simultaneously

18. Speed - Cache Journal’s editor coins term cache for local storage 3-4 times faster than core memory technology Overlapped fetch can process 64 bytes of memory 16 byte data path & 4-way memory interleaving