Download presentation
Presentation is loading. Please wait.
Published byNorah Wright Modified over 9 years ago
1
University Physics: Mechanics Ch2. STRAIGHT LINE MOTION Lecture 3 Dr.-Ing. Erwin Sitompul http://zitompul.wordpress.com
2
3/2 Erwin SitompulUniversity Physics: Mechanics Announcement 12.10.1017.15–19.15: Class 19.15–20.30: Quiz 1 19.06.1017.15–18.15: Class & Make-up Quiz 1 18.45–20.30: Class & Discuss Quiz 1 26.06.1018.30–20.15: Mid-term Examination 15.10.1017.30–19.30: Class 19.30–20.45: Quiz 1 22.06.1017.30–18.30: Class & Make-up Quiz 1 19.00–20.45: Discussion of Quiz 1 29.06.1018.30–20.15: Mid-term Examination PTMI (Tuesdays) Regular (Fridays)
3
3/3 Erwin SitompulUniversity Physics: Mechanics Solution of Homework 2: Aprilia vs. Kawasaki An Aprilia and a Kawasaki are separated by 200 m when they start to move towards each other at t = 0. The Aprilia moves with initial velocity 5 m/s and acceleration 4 m/s 2. The Kawasaki runs with initial velocity 10 m/s and acceleration 6 m/s 2. 200 m (a)Determine the point where the two motorcycles meet each other.
4
3/4 Erwin SitompulUniversity Physics: Mechanics Solution of Homework 2: Aprilia vs. Kawasaki Possible answer Both motorcycles meet after 5 seconds Where? Thus, both motorcycles meet at a point 75 m from the original position of Aprilia or 125 m from the original position of Kawasaki.
5
3/5 Erwin SitompulUniversity Physics: Mechanics Solution of Homework 2: Aprilia vs. Kawasaki (b)Determine the velocity of Aprilia and Kawasaki by the time they meet each other. What is the meaning of negative velocity?
6
3/6 Erwin SitompulUniversity Physics: Mechanics Free Fall Acceleration Accelerating feathers and apples in a vacuum A free falling object accelerates downward constantly (air friction is neglected). The acceleration is a = –g = –9.8 m/s 2, which is due to the gravitational force near the earth surface. This value is the same for all masses, densities and shapes. With a = –g = –9.8 m/s 2.
7
3/7 Erwin SitompulUniversity Physics: Mechanics Example: Niagara Free Fall In 1993, Dave Munday went over the Niagara Falls in a steel ball equipped with an air hole and then fell 48 m to the water. Assume his initial velocity was zero, and neglect the effect of the air on the ball during the fall. (a)How long did Munday fall to reach the water surface? Niagara Falls
8
3/8 Erwin SitompulUniversity Physics: Mechanics Example: Niagara Free Fall In 1993, Dave Munday went over the Niagara Falls in a steel ball equipped with an air hole and then fell 48 m to the water. Assume his initial velocity was zero, and neglect the effect of the air on the ball during the fall. (b)What was Munday’s velocity as he reached the water surface? or Positive (+) or negative (–) ?
9
3/9 Erwin SitompulUniversity Physics: Mechanics Example: Niagara Free Fall In 1993, Dave Munday went over the Niagara Falls in a steel ball equipped with an air hole and then fell 48 m to the water. Assume his initial velocity was zero, and neglect the effect of the air on the ball during the fall. (c)Determine Munday’s position and velocity at each full second.
10
3/10 Erwin SitompulUniversity Physics: Mechanics Example: Baseball Pitcher A pitcher tosses a baseball up along a y axis, with an initial speed of 12 m/s. (a)How long does the ball take to reach its maximum height?
11
3/11 Erwin SitompulUniversity Physics: Mechanics A pitcher tosses a baseball up along a y axis, with an initial speed of 12 m/s. (b)What is the ball’s maximum height above its release point? Example: Baseball Pitcher
12
3/12 Erwin SitompulUniversity Physics: Mechanics A pitcher tosses a baseball up along a y axis, with an initial speed of 12 m/s. (c)How long does the ball take to reach a point 5.0 m above its release point? Both t 1 and t 2 are correct t 1 when the ball goes up, t 2 when the ball goes down Example: Baseball Pitcher
13
University Physics: Mechanics Ch3. VECTOR QUANTITIES Lecture 3 Dr.-Ing. Erwin Sitompul http://zitompul.wordpress.com
14
3/14 Erwin SitompulUniversity Physics: Mechanics Vectors and Scalars A displacement vector represents the change of position. Both magnitude and direction are needed to fully specify a displacement vector. The displacement vector, however, tells nothing about the actual path. A vector quantity has magnitude as well as direction. Some physical quantities that are vector quantities are displacement, velocity, and acceleration. A scalar quantity has only magnitude. Some physical quantities that are scalar quantities are temperature, pressure, energy, mass, and time.
15
3/15 Erwin SitompulUniversity Physics: Mechanics Adding Vectors Geometrically Suppose that a particle moves from A to B and then later from B to C. The overall displacement (no matter what its actual path) can be represented with two successive displacement vectors, AB and BC. The net displacement of these two displacements is a single displacement from A to C. AC is called the vector sum (or resultant) of the vectors AB and BC. The vectors are now redrawn and relabeled, with an italic symbol and an arrow over it. For handwriting, a plain symbol and an arrow is enough, such as a, b, s. → → →
16
3/16 Erwin SitompulUniversity Physics: Mechanics Adding Vectors Geometrically Two vectors can be added in either order. Three vectors can be grouped in any way as they are added.
17
3/17 Erwin SitompulUniversity Physics: Mechanics Adding Vectors Geometrically The vector –b is a vector with the same magnitude as b but the opposite direction. Adding the two vectors would yield Subtracting b can be done by adding –b. →→ →→
18
3/18 Erwin SitompulUniversity Physics: Mechanics Adding vectors geometrically can be tedious. An easier technique involves algebra and requires that the vectors be placed on a rectangular coordinate system. For two-dimensional vectors, the x and y axes are usually drawn in the drawing plane. A component of a vector is the projection of the vector on an axis. Components of Vectors
19
3/19 Erwin SitompulUniversity Physics: Mechanics Note, that the angle θ is the angle that the vector makes with the positive direction of the x axis. The calculation of θ is done in counterclockwise directions. What is the value of θ on the figure above? θ = 324.46° or –35.54° Components of Vectors
20
3/20 Erwin SitompulUniversity Physics: Mechanics Vectors with various sign of components are shown below: Components of Vectors
21
3/21 Erwin SitompulUniversity Physics: Mechanics Which of the indicated methods for combining the x and y components of vector a are proper to determine that vector? Components of Vectors →
22
3/22 Erwin SitompulUniversity Physics: Mechanics Components of Vectors Example: A small airplane leaves an airport on an overcast day and it is later sighted 215 km away, in a direction making an angle of 22° east of due north. How far east and north is the airplane from the airport when sighted? Solution: Thus, the airplane is 80.54 km east and 199.34 km north of the airport.
23
3/23 Erwin SitompulUniversity Physics: Mechanics Trigonometric Functions Sine Cosine Tangent
24
3/24 Erwin SitompulUniversity Physics: Mechanics Unit Vectors A unit vector is a vector that has a magnitude of exactly 1 and points in a particular direction. The unit vectors in the positive directions of the x, y, and z axes are labeled i, j, and k. Unit vectors are very useful for expressing other vectors: ^^^
25
3/25 Erwin SitompulUniversity Physics: Mechanics Adding Vectors Geometrically Vectors can be added geometrically by subsequently linking the head of one vector with the tail of the other vector. The addition result is the vector that goes from the tail of the first vector to the head of the last vector.
26
3/26 Erwin SitompulUniversity Physics: Mechanics Adding Vectors by Components Another way to add vectors is to combine their components axis by axis.
27
3/27 Erwin SitompulUniversity Physics: Mechanics Adding Vectors by Components In the figure below, find out the components of d 1, d 2, d 1 +d 2. Component Notation Magnitude-angle Notation where →→→→
28
3/28 Erwin SitompulUniversity Physics: Mechanics Desert Ant Adding Vectors by Components
29
3/29 Erwin SitompulUniversity Physics: Mechanics Trivia A bear walks 5 km to the south. Resting a while, it continues walking 5 km east. Then, it walks again 5 km to the north and the bear reaches its initial position. What is the color of the bear? 5 km, south 5 km, north 5 km east Polar Bear with White Fur
30
3/30 Erwin SitompulUniversity Physics: Mechanics Homework 3: The Beetles Two beetles run across flat sand, starting at the same point. The red beetle runs 0.5 m due east, then 0.8 m at 30° north of due east. The green beetle also makes two runs; the first is 1.6 m at 40° east of due north. What must be (a) the magnitude and (b) the direction of its second run if it is to end up at the new location of red beetle? 1 st run 2 nd run 1 st run 2 nd run?
31
3/31 Erwin SitompulUniversity Physics: Mechanics Homework 3 Dora, accompanied by Boots, wants to go back to her house, 10 km north east of their current position. To avoid the forest, Dora decides that they should first walk in the direction 20° north of due east, before later keep walking due north until reaching her house. (a)Determine the distance Dora and Boots must travel in their first walk. (b)Determine the distance they must travel in their second walk. New 1 0 k m (c)Determine the total distance they must traveled to reach Dora’s house.
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.