1. doc.: IEEE 802.11-11/1422r0 November 2011 Jonghyun Park, LG Electronics Inc. Submission 11ah Channelization of Korea Author: Date: November 7, 2011 NameCompanyAddressPhoneemail Jonghyun ParkLG Electronics LG R&D Complex 533, Hogye- 1dong, Dongan-gu, Anyang-shi, Kyungki-do, Korea +82-31-450- 7117 jonghyun10.park@lge.c om Yongho SeokLG Electronics LG R&D Complex 533, Hogye- 1dong, Dongan-gu, Anyang-shi, Kyungki-do, Korea +82-31-450- 1947 yongho.seok@lge.com Hyangsun YouLG Electronics LG R&D Complex 533, Hogye- 1dong, Dongan-gu, Anyang-shi, Kyungki-do, Korea +82-31-450- 7897 sssun.you@lge.com Minho CheongETRI 161 Gajeong-dong, Yuseong-gu, Daejeon, Korea +82-42-860- 5635 minho@etri.re.kr Slide 1

2. doc.: IEEE 802.11-11/1422r0 November 2011 Jonghyun Park, LG Electronics Inc. Submission Abstract In this submission, we propose a minor change of 11ah channelization of Korea: –Shift right by 0.5 MHz the current whole channelization graphic for Korea 917 [MHz]923 1 MHz 2 MHz 4 MHz Current: 1 MHz 2 MHz 4 MHz 917.5 [MHz]923.5 Proposed: Shift by 0.5 Slide 2

3. doc.: IEEE 802.11-11/1422r0 November 2011 Jonghyun Park, LG Electronics Inc. Submission S1G Unlicensed band in Korea The unlicensed band 917 MHz – 923.5 MHz is assigned for –RFID devices and Wireless Sensor Networks. RFID (Radio Frequency IDentification) and USN (Ubiquitous Sensor Network) must share the spectrum in 917 MHz – 923.5 MHz in Korea IEEE802.11ah belongs in the same category as USN in Korea Slide 3

4. doc.: IEEE 802.11-11/1422r0 November 2011 Jonghyun Park, LG Electronics Inc. Submission Channel plan for RFID in 917 – 923.5MHz 917 – 920.6 MHz –RFID which uses DRM(Dense Reader Mode) has priority –Channel spacing : 600 KHz (CH 2, 5, 8, 11, 14, 17) –Occupied bandwidth ≤ 200 KHz, Maximum Power : 4W EIRP –Frequency offset tolerance : ± 10 ppm 920.6 – 923.5MHz –Occupied bandwidth ≤ 200 KHz, Maximum Power : 200mW EIRP Slide 4

5. doc.: IEEE 802.11-11/1422r0 November 2011 Jonghyun Park, LG Electronics Inc. Submission Sharing conditions for RFID and USN Channel plan for USN –Occupied bandwidth: No restriction (≤ 6.5MHz ) –Frequency offset tolerance: ±40 ppm –Maximum Power: 10 mW EIRP except RFID tag channels, 3 mW EIRP in RFID tag channels RFID tag channels : CH 1, 3, 4, 6, 7, 9, 10, 12, 13, 15, 16, 18 Sharing conditions for RFID and USN –LBT (Listen Before Transmission) Carrier sensing time ≥ 5 ms Carrier sensing level = -65dBm Transmission duration ≤ 4 second Pause duration ≥ 50 ms –Duty Cycle: Below 2% in 20 sec duration Slide 5

6. doc.: IEEE 802.11-11/1422r0 November 2011 Jonghyun Park, LG Electronics Inc. Submission Proposal and Rationale Proposed channelization gives us one more DRM RFID channel avoidance for all cases of 1/2/4 MHz 1 MHz 2 MHz 4 MHz 917.5 MHz923.5 MHz Proposed: Shift by 0.5 CH 2 additionally avoided for 1, 2 MHz CH 11 additionally avoided for 4 MHz Slide 6

7. doc.: IEEE 802.11-11/1422r0 November 2011 Jonghyun Park, LG Electronics Inc. Submission Motion 1 Do you support the revised channelization of Korea as follows? –Shift right by 0.5 MHz the current whole channelization graphic for Korea Slide 7 917 [MHz]923 1 MHz 2 MHz 4 MHz Current: 1 MHz 2 MHz 4 MHz 917.5 [MHz]923.5 Proposed: Shift by 0.5

8. doc.: IEEE 802.11-11/1422r0 November 2011 Jonghyun Park, LG Electronics Inc. Submission References [1] IEEE 802.11-11/1329r1, Motions and SP on Channelization for 11ah [2] IEEE 802.15-10/0505r0, Potential Channel Plan for TG4g SUN in Korean 900MHz band Slide 8