1. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Dr. Joseph A. Morgan, D.E., P.E. jmorgan@tamu.edu 979-575-0128 ENTC 419 Engineering Technology Capstone I

2. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Intent – Capstone Design Project is completed in last two semester of EET/TET undergraduate curriculum Must be able to complete all required technical coursework by the end of ENTC 420 semester Student validates prereqs via Prerequisite Certification Form (PCF) Incomplete/inaccurate PCF will result in student being dropped from ENTC 419 Must have satisfactorily completed ENTC 369

3. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Must be completed by end of Spring 2016 semester ESET is dropping ENDG 407/408 as an approved Tech Elective – request can be made to ESET ESET has not offered two Tech Electives in the same semester Need to have approved plan to complete technical course work

4. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Taking five courses during capstone semesters is not advisable Make sure your team is aware of the number of courses you are taking and the amount of effort you will be able to expend on Capstone (both semesters) Memo signed by all team members Not satisfying all requirments for ESET 420 will require you to retake ESET 419 with a new team

5. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Problem Statement Concept of Utilization Functional Requirements Conceptual Block Diagram Performance Specifications Technology Survey Functional Block Diagram Sensor Characteristics Interfaces/Protocols Deliverables Milestones Gantt Chart Test Matrix Technical Merit

6. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Capstone Design students SHALL must create a project team of from three to four members, selected a team name, and a team manager. This action SHALL be documented in a formal memorandum delivered to the ESET Program Assistant in hard copy. The memo SHALL include the team name, the team members, the team manager, and contact information (email and cell #) for all members. In addition, a short description of the project scope should be included in this memo. The Web folder password SHALL be hand- written in the bottom right corner of this document. A copy of the team memo (without the password) SHALL be posted to the team web site. The team manager must also email the course instructor a soft copy of this memo from the email account using the address that will be assigned to the project team for all correspondence from the instructor. Both hardcopy and email softcopy of the document must be provided by the due date. Please note that the scope of your project must be consistent with the number of members in your team – choosing four members will necessitate that more work will be accomplished during the ENTC 420 semester. Late or incomplete submissions will reduce the team’s/student’s grade for this assignment.

7. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Additional Objectives – Professional ethics – Global awareness – C (Communications) course – Videotaping and self critique Correspondence – Email – Memo – Letter – Presentation – Report

8. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Assemble a team Select a project Secure an advisor and sponsor Evaluate technical merit Complete all planning activities Scope Time Costs Use SDP Outline to manage project Utilize semester break wisely Execute/control using plan as roadmap

9. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Attendance is mandatory Course grade < Final exam grade Extra credit is available (Week 7) Deliverables Document Preliminary Design Review (PDR) Presentations – Wednesday of week 8 – 30-minute presentation – Problem understanding – Initial design – use the System Design Process (SDP) Document – Seeking approval to continue

10. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Resource available to support Capstone projects Team must agree to and adhere to guidelines and requirements Conduct yourself as an adult and professional engineer at all times Leave all resources better that you found them Team accepts maintenance responsibility Lack of professional behavior will remove access authorization See ESET Administrative Coordinator to receive authorization Training is required to use Mechanical Fab equipment

11. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Review/Edit of draft documents/presentations Feedback used to improve quality Deliverables must have draft review Unless specifically indicated otherwise Documentation of draft review Draft document must be attached to final version Cover page used on deliverables Signature of editor shown on cover page

12. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Company Logo Company Name Team members Deliverable Name Due Date Individual responsible for deliverable Editor name Editor signature

13. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Mr. Bill Aycock ‘75 T009E Technical Lab Manager Great informational resource Adding significant value to PIC PIC supervision / authority Teaching Mech Fab Eq training courses Monitor/control usages of resources Make him your “advocate”

14. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Focus Planning Design Paper/Presentation deliverables Attention to detail

15. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Meet with advisor Determine how to interface/use this resource Resource perspective Scheduling meetings (weekly/as needed) Participation (all team members) Preparation (discussion/presentation) Documentation (email/memo/etc) Lead-time for sign off/scheduling

16. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today SCOPE TIME Cost RISKS STAKEHOLDERS MILESTONES Functional Design Conceptual Design FTP White Paper Quad Charts Gantt NLD RAM WBS DELIVERABLES SPI, CPI BCWP BCWS ACWP Earned Value

17. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Ideas – Quad Chart Scope Work Breakdown Structure (WBS) Responsibility Assignment Matrix (RAM) Time – Network Logic Diagram (NLD) Risk – Risk Management Plan Cost – Project cost estimates Summary – Gantt Chart

18. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today System Design Process (SDP) Presentation Wednesday of 8 th week All team members must be present Invite sponsor and advisor Sign-off is required System Design Process (SDP) Document 419 and 420

19. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today System Design Process (SDP) Document First submission – Week 9 Dynamic document Used by TAT members to guide and evaluate team efforts and accomplishments Must be kept current

20. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Each student is required to develop two Quad Charts that briefly describe a potential senior design project. The Quad Charts are due by 3PM on Wednesday of the third week of class. The Quad Charts must be provided in hard copy and be emailed to the course instructor so that the email is received on or before the due date/time. Late or incomplete submissions will reduce the student’s grade for this assignment. Although two or more students may generate Quad Charts on similar projects, each Quad Chart must be an independent effort and not utilize or contain any information generated by another person or source. The format for the Quad Chart is provided with an example in this presentation. No variations from this format will be accepted. Hard copies should be printed in color.

21. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today Header – four items Project Name Company Point of Contact Date Quad sections Depiction of idea – grab attention Technical approach – phases Capabilities – high level Schedule and ROM Includes deliverables Footer – contact info

22. Features Determine orientation of vehicle by the knowledge of a digital compass inside the vehicle. Accommodate up to 250 vehicles at intersection using a traffic light Wi-Fi server. Independent street light population based on vehicle orientation via in-car Wi-Fi transmitter. Efficient state machine calculates each light state time by an estimating algorithm. Smoother traffic flow created by real time intercommunication of intersections. Technical Approach Phase 1: Contact Texas Transportation Institute(TTI) to research traffic issues including flow and traffic light algorithms. Phase 2: Develop a high capacity Wi-Fi system to receive vehicle information and orientation. Create a more effective traffic light state machine through intelligent algorithms. Phase 3: Verify, install, and test the system using multiple vehicle devices, 4-way intersections, and a predetermined route including 3 traffic lights. Phase 4: Demonstrate the functional prototype to TTI. ROM Timeline Phase 1: 2 weeks – thorough research: $15k Phase 2: 8 weeks – Develop working prototype: $40k Phase 3: 4 weeks – Verification and testing: $25k Phase 4: 10 weeks – Production stage: $50k Total Cost: $130k Total Development Time: 24 weeks Deliverables Wi-Fi server to accommodate each intersection Receives vehicle info and communicates with other intersections Inexpensive digital compass and transmitter for vehicles Traffic Orientation Station 10001111001 00011001000 Wi-Fi Contact: Ima Inventor For Information, Contact: inventor@gmail.com (210)-555-5272 Date: August 25, 2008

23. ELECTRONIC SYSTEMS ENGINEERING TECHNOLOGY TEXAS A&M UNIVERSITY Innovating tomorrow’s products and systems today