Download presentation
Presentation is loading. Please wait.
Published byThomasina Hampton Modified over 9 years ago
1
Hydraulic Fracturing
2
60 Years of Hydraulic Fracturing 1949 to 2010 On March 17, 1949, a team comprised of Stanolind Oil Company and Halliburton personnel converged on a well about 12 miles east of Duncan, OK, to perform the first commercial application of hydraulic fracturing. Later the same day, Halliburton and Stanolind personnel fractured another well near Holliday, TX. The technique had been developed and patented by Stanolind (later known as Pan American Oil Company, then Amoco, and now BP) and an exclusive license issued to Halliburton to perform the process. In 1953, the license was extended to all qualified service companies. Since that day in 1949, hydraulic fracturing has done more to increase recoverable reserves than any other technique, and is a “must” for commercial production from most North American reservoirs…
3
Hydraulic Fracturing – Essential Technology Well over 1,500,000 wells hydraulically fractured (since 1949) >40,000 NA wells fractured in 2011 > 125,000 NA fracture treatments in 2011 > $20 Billion NA market Essential for most unconventional resources – Gas shales (and oil) – Tight sands
6
Stimulate the Well Optimize each stage with appropriate stimulation design. Monitor Each Stage in real time
7
What Do Fractures Really Look Like? 500 m
8
Downhole Microseismic Monitoring Treatment Well Observation Well Typically 12-3C Level @ 40 ft Observation Distance Depends on Seismic Attenuation Perforated Interval Microseismic Monitoring Is Applied Earthquake Seismology (Seismology 101) – Based On Principles Known For Decades – Has Been Used Since Mid-1970’s (Hot Dry Rock) – Primary Difference Is The Use Of A Downhole Array
9
Mapped microseismic height for Barnett shale Top: shallowest microseism; Bottom: deepest microseism Aquifers: USGS deepest water wells by county Smallest height growth at shallow depths Large spikes are likely fault interactions
10
Mapped microseismic height for Marcellus shale Top: shallowest microseism; Bottom: deepest microseism Aquifers: USGS deepest water wells by county Smallest height growth at shallow depths
11
Mapped microseismic height for Woodford shale Top: shallowest microseism; Bottom: deepest microseism Aquifers: USGS deepest water wells by county Smallest height growth at shallow depths
12
Mapped microseismic height for Eagle Ford shale Top: shallowest microseism; Bottom: deepest microseism Aquifers: USGS deepest water wells by county Smallest height growth at shallow depths
13
Mapped microseismic height for Niobrara Top: shallowest microseism; Bottom: deepest microseism Aquifers: USGS deepest water wells by county Smallest height growth at shallow depths
14
Conclusions Decades of study and monitoring of thousands of fracture treatments have demonstrated: – Fracture treatments in shales do not grow into aquifers Microseismic data Simple volumetric calculations – Fracture growth vertically is inhibited by layering & interfaces Mineback, laboratory, numerical, and field studies – Fracture growth in the near-surface region is limited by horizontal components Tiltmeter data, stress measurements – Faults can influence fracture growth, but do not provide pathways for fracture fluid to reach the surface – From a mechanics perspective, hydraulic fracturing is safe!
15
Common Fracturing Chemicals typically used at <0.1% concentration Common Additives Used in Slick Water Fracturing CompositionCAS NumberPercentage of shale fracs that use this additive. (This in NOT concentration) Alternate Use Friction ReducerPolyacrylamide9003-05-8Near 100% of all fracs use this additive Adsorbent in baby diapers, flocculent in drinking water preparation BiocideGlutaraldehyde111-30-880% (decreasing)Medical disinfectant Alternate BiocideOzone, Chlorine dioxide UV, 10028-15-6 10049-04- 4 20% (increasing)Disinfectant in municipal water supplies Scale InhibitorPhosphonate & polymers 6419-19-8 and others10 – 25% of all fracs use this additive Detergents and medical treatment for bone problems. SurfactantSoaps, alchoholsvarious10 to 25% of all fracs use this additive Dish soaps, cleaners
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.