1. FB Maschinenbau | Institut für Produktionsmanagement, Technologie und Werkzeugmaschinen | Prof. Dr.-Ing. E. Abele | 21XXXXKÜ1 | 0 Our Partners (in excerts) Our Offers to the industry  Optimization of the Tool Geometry and the Machining Parameters to Increase Tool Life and to Enhance the Surface Quality of the Components  Centrifugal Force Tests for HSC-Tools and Rotating Components  Analysis of the Force and Vibration Ratios in High Speed Machining to Predict Process Stability Our Competences  Development of Optimized Tools (e.g. Cutting Materials, Coating) used for the Field of High Speed Cutting of Sheet Metal  Determination of the Maximum Operating Speed of fast Rotating tools by Destructive and Non-Destructive Testing Research Topic High Speed Machining Contact person: Jia Tian | tian@ptw.tu-darmstadt.de | 06151-16-3456

2. FB Maschinenbau | Institut für Produktionsmanagement, Technologie und Werkzeugmaschinen | Prof. Dr.-Ing. E. Abele | 21XXXXKÜ1 | 1 Research Topic Titanium Machining Contact person: Roland Hölscher I hoelscher@ptw.tu-darmstadt.de | 06151-16-3456 Current Research Topics  Tool Life while Machining different Titanium alloys  Research of different Cool and Lubrication Medium (Waterbased Emulsion, Ester-Oil, CO 2 -Cooling, MQL)  Influence and Performance of Coatings on Tool Life  Development and Evaluation of High Feed Tools (HFC)  Influence of Machine Oscillations and Stability on the Cutting Process  Examinations of the Usage of the HSC-Effect  New Strategies for Economic Titanium-Machining Our Offers to the Industry Analysis of Machining Parts and Tools Process Forces Vibration Behaviour Part Quality Tool Wear, eg. Our Partners (in excerpts)

3. FB Maschinenbau | Institut für Produktionsmanagement, Technologie und Werkzeugmaschinen | Prof. Dr.-Ing. E. Abele | 21XXXXKÜ1 | 2 Research topic Powertrain Machining Contact persons: Patrick Pfeiffer | pfeiffer@ptw.tu-darmstadt.de | 06151-16-6624 Our Partners (in excerpts) Our Competences  Holistic Increase in Productivity for Machining Processes within the Automobile Powertrain  Implementation of Innovative Cooling and Lubricating Strategies  Designing of High Performance Cutting Tools Our Offers to the Industry  Analysis and Designing of Turning, Milling and Cylinder Boring Processes Concerning  Tool Life and Wear Mechanisms  Process Forces  Part Quality  Optimization of Tool Geometry for High Performance Cutting Tools (Carbide, Ceramic, cBN, PCD) to Improve the Operational Behavior Mapal

4. FB Maschinenbau | Institut für Produktionsmanagement, Technologie und Werkzeugmaschinen | Prof. Dr.-Ing. E. Abele | 21XXXXKÜ1 | 3 Research topic Drilling and Reaming Contact persons: Thomas Hauer | hauer@ptw.tu-darmstadt.de | 06151-16-6621 Our Partners (in excerts) Our Competences  Tool Optimization for High Performance in Drilling and Reaming  Simulation of Drilling and Reaming Operations  Control of Uncertainties in the Process Chain Drilling-Reaming Our Offers to the industry  Analysis of Tools for Drilling and Reaming Concerning  Process Forces  Vibration Behaviour  Part Quality  Tool Wear  Optimization of Tool Geometry for an Improvement in Operational Behaviour