Presentation is loading. Please wait.

Presentation is loading. Please wait.

Chapter 23 Electric Potential. Basics The potential due to an electric dipole is just the sum of the potentials due to each charge, and can be calculated.

Similar presentations


Presentation on theme: "Chapter 23 Electric Potential. Basics The potential due to an electric dipole is just the sum of the potentials due to each charge, and can be calculated."— Presentation transcript:

1 Chapter 23 Electric Potential

2 Basics

3 The potential due to an electric dipole is just the sum of the potentials due to each charge, and can be calculated exactly. For distances large compared to the charge separation: 23-6 Electric Dipole Potential

4 23-7 E Determined from V If we know the field, we can determine the potential by integrating. Inverting this process, if we know the potential, we can find the field by differentiating: This is a vector differential equation; here it is in component form:

5 The potential due to an electric dipole is just the sum of the potentials due to each charge, and can be calculated exactly. For distances large compared to the charge separation: Can always choose system such that P lies in x-y plane. 23-6 Electric Dipole Potential

6 23-6 Electric Dipole Potential -- Field

7 Copyright © 2009 Pearson Education, Inc. Summary of Chapter 23 Electric potential is potential energy per unit charge: Potential difference between two points: Potential of a point charge:

8 Copyright © 2009 Pearson Education, Inc. Equipotential: line or surface along which potential is the same. Electric dipole potential is proportional to 1/r 2. To find the field from the potential: Summary of Chapter 23

9 Copyright © 2009 Pearson Education, Inc. Chapter 24 Capacitance, Dielectrics, Electric Energy Storage

10 Copyright © 2009 Pearson Education, Inc. Capacitors Determination of Capacitance Capacitors in Series and Parallel Electric Energy Storage Dielectrics Molecular Description of Dielectrics Units of Chapter 24

11 Copyright © 2009 Pearson Education, Inc. A capacitor consists of two conductors that are close but not touching. A capacitor has the ability to store electric charge. 24-1 Capacitors

12 Copyright © 2009 Pearson Education, Inc. Parallel-plate capacitor connected to battery. (b) is a circuit diagram. 24-1 Capacitors

13 Copyright © 2009 Pearson Education, Inc. When a capacitor is connected to a battery, the charge on its plates is proportional to the voltage: The quantity C is called the capacitance. Unit of capacitance: the farad ( F ): 1 F = 1 C/V. 24-1 Capacitors

14 Copyright © 2009 Pearson Education, Inc. 24-2 Determination of Capacitance For a parallel-plate capacitor as shown, the field between the plates is E = Q/ ε 0 A. Integrating along a path between the plates gives the potential difference: V ba = Qd/ ε 0 A. This gives the capacitance:

15 Copyright © 2009 Pearson Education, Inc. 24-2 Determination of Capacitance Example 24-1: Capacitor calculations. (a) Calculate the capacitance of a parallel-plate capacitor whose plates are 20 cm × 3.0 cm and are separated by a 1.0-mm air gap. (b) What is the charge on each plate if a 12-V battery is connected across the two plates? (c) What is the electric field between the plates? (d) Estimate the area of the plates needed to achieve a capacitance of 1 F, given the same air gap d.

16 Copyright © 2009 Pearson Education, Inc. 24-2 Determination of Capacitance Capacitors are now made with capacitances of 1 farad or more, but they are not parallel- plate capacitors. Instead, they are activated carbon, which acts as a capacitor on a very small scale. The capacitance of 0.1 g of activated carbon is about 1 farad. Some computer keyboards use capacitors; depressing the key changes the capacitance, which is detected in a circuit.

17 Copyright © 2009 Pearson Education, Inc. 24-2 Determination of Capacitance Example 24-2: Cylindrical capacitor. A cylindrical capacitor consists of a cylinder (or wire) of radius R b surrounded by a coaxial cylindrical shell of inner radius R a. Both cylinders have length l which we assume is much greater than the separation of the cylinders, so we can neglect end effects. The capacitor is charged (by connecting it to a battery) so that one cylinder has a charge +Q (say, the inner one) and the other one a charge –Q. Determine a formula for the capacitance.

18 Copyright © 2009 Pearson Education, Inc. 24-2 Determination of Capacitance Example 24-3: Spherical capacitor. A spherical capacitor consists of two thin concentric spherical conducting shells of radius r a and r b as shown. The inner shell carries a uniformly distributed charge Q on its surface, and the outer shell an equal but opposite charge –Q. Determine the capacitance of the two shells.

19 Copyright © 2009 Pearson Education, Inc. 24-2 Determination of Capacitance Consider two small (radius r) spheres a large distance (R) apart. What is their capacitance?

20 Copyright © 2009 Pearson Education, Inc. 24-2 Determination of Capacitance Consider two small (radius r) spheres a large distance (R) apart. What is their capacitance?

21 Copyright © 2009 Pearson Education, Inc. Questions?


Download ppt "Chapter 23 Electric Potential. Basics The potential due to an electric dipole is just the sum of the potentials due to each charge, and can be calculated."

Similar presentations


Ads by Google