2. Printing to the ARPB2 in a MAC environment This installation guide will show the technician the procedure for connecting to the AR- PB2 print controller through the network and installing the AR-PB2 PPD. For this procedure, the Laserwriter 8 or the AdobePS driver can be used. The Laserwriter 8 driver comes with the Macintosh system software, and the AdobePS driver can be obtained from Adobe’s web site at: www.adobe.com free of charge. Prerequisites: Macintosh System 7.6 or later and EtherTalk on Macintosh. Sharp AR-PB2 installer software on a disk or network share. A Sharp Digital Imager connected to the network with TCP/IP properly configured. The firmware and software on the print controller and the Imager must be the latest versions. Note: Items in Italics indicate icons, buttons or menu options during installation.

3. Procedure: 1 In order to print to the Sharp Digital Imager, AppleTalk must be set to run over Ethernet. From the Apple menu select Control Panels and then click on AppleTalk.